Tools 777
Sold by · show all
| Photo | Tool | Maker | Category | Sellers |
|---|---|---|---|---|
| 10" Standard Jacks "The Gondoliers"Large jacks based on a pair of 10.5" Dinos, built to stay precise enough for delicate work at scale. | Watanabe Glass Tools | Jacks | 1 | |
| 7.5" Standard JacksThe maker's most popular size: an all-round jack with smooth tool steel blades and a lively spring, modeled on Dino jacks. | Watanabe Glass Tools | Jacks | 1 | |
| 7.5" Steel Standard JacksStout steel blades that carry their mass further down than cup jacks. A good first pair for students. | Ennion Glass Tools | Jacks | 1 | |
| 8" Bronze Standard JacksA stouter, beefier-bladed version of the bronze cup jacks. | Ennion Glass Tools | Jacks | 1 | |
| 8" Standard JacksA versatile size for someone who only owns one pair, with a slightly longer blade and handle than the 7.5". | Watanabe Glass Tools | Jacks | 1 | |
| 9" Bronze Standard JacksRobust bronze-bladed jacks for 2- or 3-gather pieces. | Ennion Glass Tools | Jacks | 1 | |
| 9" Standard JacksStandard jacks with 9" smooth tool steel blades and a slim handle that closes without pinching. | Watanabe Glass Tools | Jacks | 1 | |
| 9" Steel Oval JacksFat oval blades after Dino Tedeschi's design. Good for keeping a jack line thick, for trimming thin lips, and for flaring with little drag. | Ennion Glass Tools | Jacks | 1 | |
| 9" Steel Standard JacksFoil-shaped steel blades brazed into stiff handles that don't flex when you squeeze hard. | Ennion Glass Tools | Jacks | 1 | |
| Avolio JacksAvolio jacks with 160 mm blades. | Carlo Donà | Jacks | 1 | |
| Bronze Cup JacksCup jacks with bronze blades, the tool Ennion started with. | Ennion Glass Tools | Jacks | 1 | |
| Bronze Round JacksRound bronze blades for soft profiles like goblet stems and avolios, and for flaring openings with little chatter. | Ennion Glass Tools | Jacks | 1 | |
| Bronze Squareback Cup JacksBronze cup jacks on a Jim Moore-style squareback handle, which holds the blades more parallel when open. Good for opening thin, straight-... | Ennion Glass Tools | Jacks | 1 | |
| Caramea JacksHand-forged Caramea-style jacks from Murano with 190 mm blades. | Carlo Donà | Jacks | 2 | |
| Clementine JacksA jacks design from Watanabe. The listing has photos but no description yet. | Watanabe Glass Tools | Jacks | 0 | |
| Clementine Step-Down JacksA step-down version of the Clementine Jacks. The listing has photos but no description yet. | Watanabe Glass Tools | Jacks | 0 | |
| Cup JackSpecialty jacks for glassblowers who make a lot of cups. | Jim Moore Glass Tools | Jacks | 3 | |
| Cup JacksCup jacks with thin, tear-drop blades. | BC Metalworking | Jacks | 2 | |
| Cup JacksCup jacks with standard or oval blades, from narrow-strap 6" models up to 8" blades, including the new Boyd model with a 34 mm strap. | Maruko Tools | Jacks | 1 | |
| Cup JacksCup jacks in the vintage Italian style, with slim 8" oval blades. Heftier than Carlo Donà's and less rigid than Jim Moore's. | Watanabe Glass Tools | Jacks | 1 | |
| Cup Jacks, MediumHand-forged cup jacks from Murano with 240 mm blades. | Carlo Donà | Jacks | 2 | |
| Cup Jacks, SmallHand-forged cup jacks from Murano with 210 mm blades. | Carlo Donà | Jacks | 2 | |
| Cup/Goblet JacksFine-bladed jacks for cups and goblets, hand-forged and modeled on Dino jacks. | Jasen Johnsen Glass Tools | Jacks | 3 | |
| Diamond File JacksJacks that hold two triangular diamond files, for scoring necks so thin or cold pieces break cleanly. | Jim Moore Glass Tools | Jacks | 2 | |
| Fabiano Amadi Cup JacksCup jacks with long 300 mm treated-steel blades, named for Fabiano Amadi. | Carlo Donà | Jacks | 1 | |
| Fuin JacksHand-forged Davide Fuin-style jacks from Murano with 160 mm blades. | Carlo Donà | Jacks | 3 | |
| Goblet JacksJacks for goblet and stem work. | BC Metalworking | Jacks | 1 | |
| Goblet JacksJacks with smaller, thinner blades for delicate goblet work, with standard or oval blades. | Maruko Tools | Jacks | 2 | |
| Goblet JacksGoblet jacks with a traditional Italian profile and a longer blade than square-back designs, for precise stem and goblet work. | Watanabe Glass Tools | Jacks | 1 | |
| Graphite Parchoffi HandleA parchoffi designed to hold graphite sticks, in two sizes. | Jim Moore Glass Tools | Jacks | 3 | |
| Ivan's Pig StickersSmall steel-bladed jacks based on Ivan Smith's liqueur jacks ("pig stickers"), for small, detailed work and lampworking. | Ennion Glass Tools | Jacks | 1 | |
| Jack Handles for Foot Tools and PaciofiStainless jack handles that take Fantlab's foot shaping tools and paciofi sticks, with fork ends sold separately. | Fantlab | Jacks | 1 | |
| JacksStandard jacks with tear-drop blades, hand-made in Minnesota and offered in cup, 8", 9", and 10" sizes. | BC Metalworking | Jacks | 3 | |
| Jacks, LargeHand-forged standard jacks from Murano with 290 mm blades. | Carlo Donà | Jacks | 3 | |
| Jacks, MediumHand-forged standard jacks from Murano with 240 mm blades. | Carlo Donà | Jacks | 3 | |
| Large JacksJacks for larger work, with longer hand-forged blades modeled on Dino jacks. | Jasen Johnsen Glass Tools | Jacks | 3 | |
| Lipping Tool for Bottle NecksA custom-designed tool for forming the lip on a bottle neck. | Carlo Donà | Jacks | 1 | |
| Mandolino JacksMandolino-style jacks in three sizes. | Carlo Donà | Jacks | 1 | |
| Medium JacksAll-round jacks with hand-forged blades, modeled on Dino jacks. | Jasen Johnsen Glass Tools | Jacks | 3 | |
| Oval (Step-Down) JacksThicker, shorter blades make these very strong, stiff jacks, similar to the style Antonio Dino originally made. | Maruko Tools | Jacks | 2 | |
| Pacioffi (Stainless)Stainless pacioffi handles that take wooden sticks, in two handle lengths. | Maruko Tools | Jacks | 1 | |
| Pacioffi HandlesEnnion jack handles with brazed-in stainless tubes that hold wood or cardboard sticks, for parchoffi work. | Ennion Glass Tools | Jacks | 1 | |
| ParchoffiStainless steel parchoffi (pacioffi) that take wooden rods, for smooth surfaces and flowing curves. A pair of cherry rods is included. | Cutting Edge Products (Red Hot Metal) | Jacks | 2 | |
| Parchoffi HandleParchoffi for smooth curves and graceful transitions. The large version has longer handles and a bigger stick bore. | Jim Moore Glass Tools | Jacks | 3 | |
| Parchoffi, Large - Round HandleParchoffi (parcioffi) with wooden sticks and a 50 mm round handle, for smooth surfaces and soft curves. | Carlo Donà | Jacks | 2 | |
| Parchoffi, Medium - Round HandleParchoffi (parcioffi) with wooden sticks and a 45 mm round handle, for smooth surfaces and soft curves. | Carlo Donà | Jacks | 2 | |
| Parchoffi, Small - Round HandleParchoffi (parcioffi) with wooden sticks and a 40 mm round handle, for smooth surfaces and soft curves. | Carlo Donà | Jacks | 2 | |
| Registered Goblet JackA specialty jack for Italian-style goblet work. Each pair is stamped with a registration number. | Jim Moore Glass Tools | Jacks | 2 | |
| Revere JacksHand-forged jacks from Murano with a profile for revere work. | Carlo Donà | Jacks | 2 | |
| Round JacksRound-bladed jacks for finish work, where detail, minimal chilling, and few tool marks matter. | Jim Moore Glass Tools | Jacks | 3 | |
| Round Jacks, MediumHand-forged round-bladed jacks from Murano with 240 mm blades. | Carlo Donà | Jacks | 3 | |
| Screw-On Pacioffi HandlesHandles for screw-on cardboard tubes. Soaked like a newspaper pad, the tubes open bowls and wide forms without leaving tool marks. | Ennion Glass Tools | Jacks | 1 | |
| Short and Light JacksShort, light jacks with 110 mm blades. | Carlo Donà | Jacks | 1 | |
| Small JacksA smaller pair of Murano-forged jacks for detail work and smaller pieces. | Carlo Donà | Jacks | 3 | |
| Square Back ParchoffiA square-back parchoffi (parcioffi) hinge sold with cherrywood sticks. | Cutting Edge Products (Red Hot Metal) | Jacks | 1 | |
| Square-Back ParchoffisSquare-back parchoffis, available with grooved ("licorice stick") or smooth blades and long or short handles. | Watanabe Glass Tools | Jacks | 1 | |
| Squareback Parchoffi HandleA small parchoffi with a squareback hinge that keeps the sticks parallel, for straightening bulging cup and vessel walls. | Jim Moore Glass Tools | Jacks | 2 | |
| Stainless Steel Jack HandlesStainless jack handles that hold wooden overlay spades and finishing tools. | JK Overlay Tools | Jacks | 1 | |
| Standard JacksGeneral-purpose jacks for necking, jack lines, and opening. The blades are gusset-brazed and can be replaced as they wear. | Jim Moore Glass Tools | Jacks | 7 | |
| Standard JacksMaruko's standard jacks: tall blades of medium thickness, in three blade lengths and several handle lengths. | Maruko Tools | Jacks | 2 | |
| Steel Cup JacksA cross between Ivan Smith's small liqueur jacks and Jim Moore's cup jacks, for cups, ornaments, and other 1–2 gather work. | Ennion Glass Tools | Jacks | 1 | |
| Steel Goblet JacksThinner, pointier blades than the cup jacks, almond-shaped so they don't drag on the inside wall. | Ennion Glass Tools | Jacks | 1 | |
| Swedish Overlay Tool SetTwo adjustable stainless handles and four pear-wood inserts for the Swedish overlay technique developed at Orrefors. | JK Overlay Tools | Jacks | 2 | |
| Toscana (Tuscan Hybrid Cup Jacks)A cup/goblet hybrid built on the 7.5" standard, with a three-bend trapezoidal strap taken from pre-war Tuscan factory jacks. | Watanabe Glass Tools | Jacks | 1 | |
| Tweezer JacksA compact tweezer-style jack with short 4.5" blades. | BC Metalworking | Jacks | 2 | |
| 1/8" D2 Diamond ShearA diamond shear with thin, hollow-ground D2 blades for cleaner cuts with less distortion, and slightly more capacity than the standard. | Jim Moore Glass Tools | Shears | 2 | |
| 3/16" D2 Diamond ShearThe standard diamond shear profile with thicker, hollow-ground D2 blades for demanding work. | Jim Moore Glass Tools | Shears | 2 | |
| Ashinaga Shears, IntermediateIntermediate-grade Ashinaga shears. | Hot Glass Color & Supply (house brand) | Shears | 1 | |
| Beer Can Shears (Italo/German-Czech Style)Heavy-duty, wide-bite shears after vintage Putsch Czech-style designs. They open wide enough to pick up a beer can. | Watanabe Glass Tools | Shears | 1 | |
| Big Combo Diamond ShearsHeavier-duty diamond shears with thick blades that won't flex. They grab a 1" pipe or cut a 2" column of glass, and slots in the profile ... | Cutting Edge Products (Red Hot Metal) | Shears | 3 | |
| Big Straight Cut-Off ShearsLong straight shears for big cuts on large sculptural pieces. They take some forearm strength. | Cutting Edge Products (Red Hot Metal) | Shears | 3 | |
| Bonsai ShearsJapanese-made bonsai shears, in rust-free stainless steel or black carbon steel. | Jasen Johnsen Glass Tools | Shears | 1 | |
| Compact D2 Diamond ShearThe thin-bladed D2 diamond shear on compact handles for smaller hands. | Jim Moore Glass Tools | Shears | 2 | |
| Compact Diamond ShearsSmaller loops and shorter finger stops than the standard diamond shears, for glassblowers with smaller hands. | Jim Moore Glass Tools | Shears | 2 | |
| Crescent ShearsA modern version of antique American crescent shears. The cut leaves a different finish than diamond shears, and they're good for color b... | Watanabe Glass Tools | Shears | 1 | |
| Cup ShearA slim shear with a small capacity for intricate work like stemware. | Jim Moore Glass Tools | Shears | 3 | |
| Cup Shears, 8"8" cup shears. | Hot Glass Color & Supply (house brand) | Shears | 1 | |
| Czech Diamond ShearA Bohemian-style diamond shear with no pipe grabber in the way. | Jim Moore Glass Tools | Shears | 3 | |
| D2 Bubble ShearA bubble shear with tough D2 blades. | Jim Moore Glass Tools | Shears | 2 | |
| D2 Casting ShearA long casting shear in tough D2 steel. | Jim Moore Glass Tools | Shears | 2 | |
| D2 Cup ShearThe cup shear with thinner, tougher D2 blades that also handle boro and cooler glass. | Jim Moore Glass Tools | Shears | 3 | |
| D2 Duckbill ShearA duckbill shear with thin, tough D2 blades. | Jim Moore Glass Tools | Shears | 2 | |
| D2 Trim ShearA trim shear with thin, tough D2 blades. | Jim Moore Glass Tools | Shears | 2 | |
| Dante Diamond ShearsCutting Edge's most popular shears: light, quick-opening diamond shears with a high capacity, designed with Dante Marioni. Good for small... | Cutting Edge Products (Red Hot Metal) | Shears | 3 | |
| Diamond Shears, 110mmHand-forged diamond shears with 110 mm blades. | Carlo Donà | Shears | 3 | |
| Diamond Shears, 130mmHand-forged diamond shears with 130 mm blades. | Carlo Donà | Shears | 2 | |
| Diamond Shears, 80mmHand-forged diamond shears with 80 mm blades. | Carlo Donà | Shears | 3 | |
| Diamond Shears, 80mm - English StyleHand-forged English-style diamond shears with 80 mm blades. | Carlo Donà | Shears | 2 | |
| Diamond Shears, 95mmHand-forged diamond shears with 95 mm blades. | Carlo Donà | Shears | 3 | |
| Duckbill ShearsCutting Edge's best-selling trim shears. A curved blade keeps the cut consistent, and a round nose keeps them from snagging. | Cutting Edge Products (Red Hot Metal) | Shears | 3 | |
| Duckbill Shears, 130mmDuckbill trim shears with 130 mm blades. | Carlo Donà | Shears | 2 | |
| Duckbill Shears, 50mmDuckbill trim shears with 50 mm blades. | Carlo Donà | Shears | 3 | |
| Duckbill Shears, 80mmDuckbill trim shears with 80 mm blades. | Carlo Donà | Shears | 3 | |
| Duckbill Shears, 95mmDuckbill trim shears with 95 mm blades. | Carlo Donà | Shears | 2 | |
| English Diamond ShearsEnglish-looking diamond shears with a wider, Putsch-style bite and ergonomic handles that open fully for most hand sizes. | Watanabe Glass Tools | Shears | 1 | |
| GS Diamond ShearsMulti-purpose diamond shears for cutting handles, stems, and bits. Curved, uncut sections near the tips grip pipes and punties, and the p... | Essemce | Shears | 2 | |
| German Medium Diamond ShearsA take on the classic Putsch medium diamond shears, made in D2 tool steel with ergonomic handles. | Watanabe Glass Tools | Shears | 1 | |
| KS General ShearsGeneral-purpose studio shears for cutting flattened bits and snipping or manipulating hot additions. | Essemce | Shears | 2 | |
| Kulaté nůžky č. 211 (Diamond Shears No. 211)Handmade diamond ("kulaté", round) glassblowing shears, 220 mm long. | SAN Mitiska | Shears | 1 | |
| Kulaté nůžky č. 221 (Diamond Shears No. 221)Handmade diamond ("kulaté", round) glassblowing shears, 240 mm long. | SAN Mitiska | Shears | 1 | |
| Kulaté nůžky č. 231 (Diamond Shears No. 231)Handmade diamond ("kulaté", round) glassblowing shears, 260 mm long. | SAN Mitiska | Shears | 1 | |
| Kulaté nůžky č. 241 (Diamond Shears No. 241)Handmade diamond ("kulaté", round) glassblowing shears, 260 mm long. | SAN Mitiska | Shears | 1 | |
| Kulaté nůžky č. 312 (Diamond Shears No. 312)Handmade diamond ("kulaté", round) glassblowing shears, 210 mm long. | SAN Mitiska | Shears | 1 | |
| Kulaté nůžky č. 322 (Diamond Shears No. 322)Handmade diamond ("kulaté", round) glassblowing shears, 220 mm long. | SAN Mitiska | Shears | 1 | |
| Kulaté nůžky č. 332 (Diamond Shears No. 332)Handmade diamond ("kulaté", round) glassblowing shears, 250 mm long. | SAN Mitiska | Shears | 1 | |
| Large Diamond ShearA big, balanced diamond shear for large gathers and bits. The long handle keeps your arm away from the heat. | Jim Moore Glass Tools | Shears | 2 | |
| Large Italo/German Diamond ShearsLarge diamond shears blending the Gaio Arturo and Putsch designs. | Watanabe Glass Tools | Shears | 1 | |
| Medium Straight Cut-Off ShearsA slightly smaller version of the Big Straight Cut-Off, good for casting and hot sculpting. | Cutting Edge Products (Red Hot Metal) | Shears | 3 | |
| Meniconi ShearsShears made by Putsch's subsidiary in Italy, the best-known of its glassblowing tools. | Putsch | Shears | 1 | |
| Parramore Slim Trim ShearsA slimmed-down cup shear for reaching into tight places, made for Roger Parramore. | Cutting Edge Products (Red Hot Metal) | Shears | 3 | |
| Parrot Bill ShearsA lip shear with a short, pointed blade for digging stones or bubbles out of hot glass. It has the Duckbill's cut and action. | Cutting Edge Products (Red Hot Metal) | Shears | 3 | |
| Penny PullersCut-off shears for pulling cane and murrine. They're slightly larger than the Big Combo, with the same thick blades and no pipe grabber. | Cutting Edge Products (Red Hot Metal) | Shears | 2 | |
| Random Specialty Diamond ShearsLong-bladed diamond shears, a 2026 remake of the first diamond shears Jeff Lindsay designed, sold under his Random Specialties name from ... | Cutting Edge Products (Red Hot Metal) | Shears | 1 | |
| Rovné nůžky Kachny č. 161 (Duckbill Shears No. 161)Handmade straight duckbill ("kachny") shears, 230 mm long. | SAN Mitiska | Shears | 1 | |
| Rovné nůžky č. 111 (Straight Shears No. 111)Handmade straight glassblowing shears, 200 mm long. | SAN Mitiska | Shears | 1 | |
| Rovné nůžky č. 112 (Straight Shears No. 112)Handmade straight glassblowing shears, 190 mm long. | SAN Mitiska | Shears | 1 | |
| Rovné nůžky č. 121 (Straight Shears No. 121)Handmade straight glassblowing shears, 240 mm long. | SAN Mitiska | Shears | 1 | |
| Rovné nůžky č. 131 (Straight Shears No. 131)Handmade straight glassblowing shears, 290 mm long. | SAN Mitiska | Shears | 1 | |
| Rovné nůžky č. 141 (Straight Shears No. 141)Handmade straight glassblowing shears, 330 mm long. | SAN Mitiska | Shears | 1 | |
| Rovné nůžky č. 151 (Straight Shears No. 151)Handmade straight glassblowing shears, 270 mm long. | SAN Mitiska | Shears | 1 | |
| SH Straight ShearsSharp, pointed straight shears for pulling out and snipping bubbles from a gather. The longer SH-2 cuts the trail from a ladle or gatheri... | Essemce | Shears | 2 | |
| SMC Duckbill ShearsSnub-nosed shears for trimming lips. Blunt tips and slightly curved blades avoid digging in and keep tool marks down. | Essemce | Shears | 2 | |
| Small Straight Cut-Off ShearsA narrow, light take on the Italian bubble shear for tight spaces. Especially useful for long, hollow Venetian stems. | Cutting Edge Products (Red Hot Metal) | Shears | 3 | |
| Standard Diamond ShearsFull-size diamond shears with large hand loops and finger stops. A solid, very popular shear for cutting gathers. | Jim Moore Glass Tools | Shears | 3 | |
| Straight Shears - 40 mm, ThinHand-forged thin straight shears with 40 mm blades. | Carlo Donà | Shears | 3 | |
| Straight Shears - 50mm, ThinHand-forged thin straight shears with 50 mm blades. | Carlo Donà | Shears | 2 | |
| Straight Shears 100mmHand-forged straight shears with 100 mm blades. | Carlo Donà | Shears | 3 | |
| Straight Shears 120mmHand-forged straight shears with 120 mm blades. | Carlo Donà | Shears | 2 | |
| Straight Shears 140mmHand-forged straight shears with 140 mm blades. | Carlo Donà | Shears | 3 | |
| Straight Shears 160mmHand-forged straight shears with 160 mm blades. | Carlo Donà | Shears | 2 | |
| Straight Shears 180mmHand-forged straight shears with 180 mm blades. | Carlo Donà | Shears | 2 | |
| Straight Shears 200mmHand-forged straight shears with 200 mm blades. | Carlo Donà | Shears | 2 | |
| Straight Shears 60mmHand-forged straight shears with 60 mm blades. | Carlo Donà | Shears | 2 | |
| Straight Shears, 80mmHand-forged straight shears with 80 mm blades. | Carlo Donà | Shears | 2 | |
| Claw Grabbers, LargeLarge claw grabbers ("hotfinger") for lampworking. | Carlo Donà | Tweezers & Tongs | 2 | |
| Convex Tweezer, Extra SmallHand-forged convex-bladed tweezers from Murano with 220 mm blades. | Carlo Donà | Tweezers & Tongs | 3 | |
| Convex Tweezers, LargeHand-forged convex-bladed tweezers from Murano with 330 mm blades. | Carlo Donà | Tweezers & Tongs | 2 | |
| Convex Tweezers, MediumHand-forged convex-bladed tweezers from Murano with 300 mm blades. | Carlo Donà | Tweezers & Tongs | 3 | |
| Convex Tweezers, SmallHand-forged convex-bladed tweezers from Murano with 260 mm blades. | Carlo Donà | Tweezers & Tongs | 2 | |
| English 11" TweezersEnglish-style tweezers with slightly beaked forged tips and a lower-profile spring than classic Italian tweezers, for better balance. | Watanabe Glass Tools | Tweezers & Tongs | 0 | |
| English 12" TweezersTweezers based on old English designs, with beaked tips like Maruko's. | Watanabe Glass Tools | Tweezers & Tongs | 0 | |
| Extra Small Flat TweezersShort 7" flat tweezers for delicate jobs. | Jim Moore Glass Tools | Tweezers & Tongs | 2 | |
| Flat Step-Down TweezersFlat tweezers whose tips step down to a fine point. | Jim Moore Glass Tools | Tweezers & Tongs | 2 | |
| Flat Tweezer, Extra, LargeHand-forged flat-bladed tweezers from Murano with 360 mm blades. | Carlo Donà | Tweezers & Tongs | 2 | |
| Flat Tweezers, Extra SmallHand-forged flat-bladed tweezers from Murano with 220 mm blades. | Carlo Donà | Tweezers & Tongs | 2 | |
| Flat Tweezers, LargeHand-forged flat-bladed tweezers from Murano with 330 mm blades. | Carlo Donà | Tweezers & Tongs | 2 | |
| Flat Tweezers, MediumHand-forged flat-bladed tweezers from Murano with 300 mm blades. | Carlo Donà | Tweezers & Tongs | 3 | |
| Flat Tweezers, SmallHand-forged flat-bladed tweezers from Murano with 260 mm blades. | Carlo Donà | Tweezers & Tongs | 2 | |
| GrabbersA three-tined stainless grabber for picking parts out of the garage or oven and holding them during sculpture assembly. | Jasen Johnsen Glass Tools | Tweezers & Tongs | 3 | |
| Haystack 10.5" Tweezers10.5" tweezers available with bronze or stainless backs. | Watanabe Glass Tools | Tweezers & Tongs | 1 | |
| Italian 12" TweezersLarge Italian-style tweezers with forged tips and a rounded interior spring, based on large Dinos. | Watanabe Glass Tools | Tweezers & Tongs | 0 | |
| Kawasemi TweezersMaruko's Kawasemi tweezers in small, medium, and large. | Maruko Tools | Tweezers & Tongs | 1 | |
| Large Jack Tweezers14" jack tweezers for deliberate wide lines, such as pre-cutting fingers and legs in sculpture. | Jasen Johnsen Glass Tools | Tweezers & Tongs | 1 | |
| Large Tweezers15" forged tweezers for big work. | Jasen Johnsen Glass Tools | Tweezers & Tongs | 3 | |
| Light Weight Put-Away TongsStainless tongs for putting ornaments and small work in the annealer. They come with high-temperature sleeves. | Steinert Industries | Tweezers & Tongs | 1 | |
| Loading TongHeavy-duty stainless tongs for loading the annealer, handy for ornaments and pumpkins. The tips have replaceable high-temperature covers. | Spiral Arts | Tweezers & Tongs | 1 | |
| Medium TweezersThe everyday 11" workhorse tweezers, forged from spring steel. | Jasen Johnsen Glass Tools | Tweezers & Tongs | 3 | |
| Needle Nose TweezersTweezers with long, fine tines for intricate bits and tight radii. | Jim Moore Glass Tools | Tweezers & Tongs | 2 | |
| Small Jack Tweezers11" jack tweezers for quick, fine lines like feathers and leaves. Also popular with lampworkers. | Jasen Johnsen Glass Tools | Tweezers & Tongs | 2 | |
| Small Tweezers8" forged tweezers for goblets and small detail work. | Jasen Johnsen Glass Tools | Tweezers & Tongs | 2 | |
| Soft Small Flat TweezersThe small flat tweezers in thinner metal for a softer squeeze. | Jim Moore Glass Tools | Tweezers & Tongs | 1 | |
| Standard Put-Away TongsStainless tongs for putting heavier pieces in the annealer. They come with high-temperature sleeves. | Steinert Industries | Tweezers & Tongs | 1 | |
| Tongs, LargeLarge grabbing tongs. Kevlar sleeves are sold separately. | Hot Glass Color & Supply (house brand) | Tweezers & Tongs | 1 | |
| Tongs, SmallSmall tongs with Kevlar sleeves included. | Hot Glass Color & Supply (house brand) | Tweezers & Tongs | 1 | |
| TweezersHigh-carbon spring steel tweezers in five lengths, with standard or beaked tips. | BC Metalworking | Tweezers & Tongs | 5 | |
| TweezersJim Moore's everyday tweezers in three lengths, with flat or concave blades. | Jim Moore Glass Tools | Tweezers & Tongs | 5 | |
| TweezersMaruko tweezers in four lengths, with beak points that grab the glass or smoother flat points. | Maruko Tools | Tweezers & Tongs | 2 | |
| TweezersGlassblowing tweezers made in-house at Novotný Glass in Nový Bor. | Novotný Glass Tools | Tweezers & Tongs | 1 | |
| Tweezers, Small 7"Handmade 7" tweezers with finely finished points for sculptural work. | Jasen Johnsen Glass Tools | Tweezers & Tongs | 1 | |
| “Martin’s” Tweezers13" sculpting tweezers designed by Martin Janecky. | Jasen Johnsen Glass Tools | Tweezers & Tongs | 2 | |
| 1.5" Marble Ring Tool with HandleA 1.5" ring tool on a handle for shaping marbles and spheres; the ring is replaceable. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| 2" Marble Ring Tool with HandleA 2" ring tool on a handle for shaping marbles and spheres; the ring is replaceable. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| 2" Marble and Paperweight BlockA steel marble and paperweight block with a cutting edge that can be raised into the work, leaving little to tweeze off. | Steinert Industries | Paddles & Blocks | 1 | |
| 2.5" Marble Ring Tool with HandleA 2.5" madrona ring tool for shaping marbles and spheres, CNC-cut for accuracy. | Leviathan GlassWorks | Paddles & Blocks | 3 | |
| 2.5" Marble and Paperweight BlockA steel marble and paperweight block with a cutting edge that can be raised into the work, leaving little to tweeze off. | Steinert Industries | Paddles & Blocks | 1 | |
| 3" Marble Ring Tool with HandleA 3" madrona ring tool for shaping marbles and spheres, CNC-cut for accuracy. | Leviathan GlassWorks | Paddles & Blocks | 3 | |
| 3" Marble and Paperweight BlockA steel marble and paperweight block with a cutting edge that can be raised into the work, leaving little to tweeze off. | Steinert Industries | Paddles & Blocks | 1 | |
| 3.5" Marble and Paperweight BlockA steel marble and paperweight block with a cutting edge that can be raised into the work, leaving little to tweeze off. | Steinert Industries | Paddles & Blocks | 1 | |
| 4" Marble Ring Tool with HandleA 4" madrona ring tool for shaping marbles and spheres, CNC-cut for accuracy. | Leviathan GlassWorks | Paddles & Blocks | 3 | |
| 4" Marble and Paperweight BlockA steel marble and paperweight block with a cutting edge that can be raised into the work, leaving little to tweeze off. | Steinert Industries | Paddles & Blocks | 1 | |
| 5" Marble Ring Tool with HandleA 5" ring tool on a handle for shaping marbles and spheres; the ring is replaceable. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Alder PaddlesSwedish alder paddles, made to your size. | Jakobsson Sweden | Paddles & Blocks | 1 | |
| BOB BlockA more rounded block that's especially good for gathering. | Jakobsson Sweden | Paddles & Blocks | 1 | |
| Basic BlockThe classic teardrop-shaped "Seattle style" block, the shape the American studio glass movement grew up with. | Blockhead Tools | Paddles & Blocks | 1 | |
| Basic PaddleA kiln-dried cherry paddle for shaping or as a heat shield, used wet or dry. | Blockhead Tools | Paddles & Blocks | 13 | |
| Carbon Weave Steamer Pad, 6" × 6"A dual-sided carbon weave steamer pad with a cotton insert, for shaping without the smoke. | Leviathan GlassWorks | Paddles & Blocks | 1 | |
| Carbon Weave Steamer Pad, 8" × 7.5"A larger dual-sided carbon weave steamer pad with a cotton insert, for shaping without the smoke. | Leviathan GlassWorks | Paddles & Blocks | 1 | |
| Cherry Paddle, 3" × 16"A 3" × 16" wooden paddle for use dry. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Cherry Paddle, 3" × 18"A 3" × 18" wooden paddle for use dry. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Cherry Paddle, 3" × 20"A 3" × 20" wooden paddle for use dry. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Cherry Paddle, 4" × 18"A 4" × 18" wooden paddle for use dry. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Cherry Paddle, 4" × 20"A 4" × 20" wooden paddle for use dry. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Cherry Paddle, 4" × 24"A 4" × 24" wooden paddle for use dry. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Cherry Paddle, 5" × 18"A 5" × 18" wooden paddle for use dry. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Cherry Paddle, 5" × 20"A 5" × 20" wooden paddle for use dry. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Cherry Paddle, 5" × 24"A 5" × 24" fine-grade cherry paddle. | Leviathan GlassWorks | Paddles & Blocks | 1 | |
| Cherry Paddle, 6" × 18"A 6" × 18" wooden paddle for use dry. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Cherry Paddle, 6" × 20"A 6" × 20" wooden paddle for use dry. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Cherry Paddle, 6" × 24"A 6" × 24" wooden paddle for use dry. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Cherry Paddle, LargeA large cherry wood paddle, handmade and branded in Glass Toolbox's Wiltshire workshop. | Glass Toolbox (house brand) | Paddles & Blocks | 2 | |
| Cherry Paddle, MediumA medium cherry wood paddle, handmade and branded in Glass Toolbox's Wiltshire workshop. | Glass Toolbox (house brand) | Paddles & Blocks | 2 | |
| Cherry Paddle, SmallA small cherry wood paddle, handmade and branded in Glass Toolbox's Wiltshire workshop. | Glass Toolbox (house brand) | Paddles & Blocks | 2 | |
| Cherrywood Paddle Co. Paddle, 3" × 16"A heavy cherrywood paddle (3" × 16") with an ergonomic handle, for shaping and loading. | Acorn Glassworks | Paddles & Blocks | 1 | |
| Cherrywood Paddle Co. Paddle, 3" × 18"A heavy cherrywood paddle (3" × 18") with an ergonomic handle, for shaping and loading. | Acorn Glassworks | Paddles & Blocks | 1 | |
| Cherrywood Paddle Co. Paddle, 4" × 18"A heavy cherrywood paddle (4" × 18") with an ergonomic handle, for shaping and loading. | Acorn Glassworks | Paddles & Blocks | 1 | |
| Cherrywood Paddle Co. Paddle, 4" × 20"A heavy cherrywood paddle (4" × 20") with an ergonomic handle, for shaping and loading. | Acorn Glassworks | Paddles & Blocks | 1 | |
| Cherrywood Paddle Co. Paddle, 5" × 18"A heavy cherrywood paddle (5" × 18") with an ergonomic handle, for shaping and loading. | Acorn Glassworks | Paddles & Blocks | 1 | |
| Cherrywood Paddle Co. Paddle, 5" × 20"A heavy cherrywood paddle (5" × 20") with an ergonomic handle, for shaping and loading. | Acorn Glassworks | Paddles & Blocks | 1 | |
| Cherrywood Paddle Co. Paddle, 6" × 24"A heavy cherrywood paddle (6" × 24") with an ergonomic handle, for shaping and loading. | Acorn Glassworks | Paddles & Blocks | 1 | |
| Cherrywood Paddle, 3" × 17"A 3" × 17" cherry paddle. | Block Party Blocks and Molds | Paddles & Blocks | 1 | |
| Cherrywood Paddle, 3.5" × 20"A 3.5" × 20" cherry paddle. | Block Party Blocks and Molds | Paddles & Blocks | 1 | |
| Cherrywood Paddle, 4" × 20"A 4" × 20" cherrywood paddle. | Block Party Blocks and Molds | Paddles & Blocks | 2 | |
| Cherrywood Paddle, 5" × 20"A 5" × 20" cherrywood paddle. | Block Party Blocks and Molds | Paddles & Blocks | 1 | |
| Cherrywood Paddle, 5" × 24"A 5" × 24" cherry paddle. | Block Party Blocks and Molds | Paddles & Blocks | 1 | |
| Cherrywood Paddle, 6" × 24"A 6" × 24" cherry paddle. | Block Party Blocks and Molds | Paddles & Blocks | 1 | |
| Color PaddleA paddle for shaping bits and mashing color, so you don't burn up the back of your jacks. | Jim Moore Glass Tools | Paddles & Blocks | 3 | |
| Cork Block, Standard RectangleA dense cork block with handles, handmade in Wiltshire, for shaping glass without marking it. | Glass Toolbox (house brand) | Paddles & Blocks | 2 | |
| Cork Blocks (Pair), LargeA pair of high-density cork blocks. | Carlo Donà | Paddles & Blocks | 1 | |
| Cork Blocks (Pair), SmallA pair of high-density cork blocks. | Carlo Donà | Paddles & Blocks | 1 | |
| Cork PaddlesCork paddles for shaping glass without leaving marks. | Correll Glass Studio | Paddles & Blocks | 3 | |
| Cork Pads, 3" × 5" (Rounded)A pair of rounded 2"-thick dense cork pads with screwed-on handles, for shaping by hand. | Leviathan GlassWorks | Paddles & Blocks | 3 | |
| Cork Pads, 3" × 5" (Square)A pair of square 2"-thick dense cork pads with screwed-on handles, for shaping by hand. | Leviathan GlassWorks | Paddles & Blocks | 3 | |
| Cork Pads, 6" × 9" (Rounded)A pair of rounded 2"-thick dense cork pads with screwed-on handles, for shaping by hand. | Leviathan GlassWorks | Paddles & Blocks | 3 | |
| Cork Pads, 6" × 9" (Square)A pair of square 2"-thick dense cork pads with screwed-on handles, for shaping by hand. | Leviathan GlassWorks | Paddles & Blocks | 3 | |
| Cork Pads, 9" × 12" (Rounded)A rounded 2"-thick cork pad with a handle, for shaping by hand; the largest size Leviathan makes. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Cork Pads, 9" × 12" (Square)A square 2"-thick cork pad with a handle, for shaping by hand; the largest size Leviathan makes. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Crab ClawsWooden crab-claw tools, made to order in Swedish alder. | Jakobsson Sweden | Paddles & Blocks | 1 | |
| Custom BlockA block made to your spec: an existing shape resized or reshaped, or an entirely new design, carved after you approve a digital proof. | Blockhead Tools | Paddles & Blocks | 1 | |
| Egg BlockA block for making egg-shaped paperweights. | Blockhead Tools | Paddles & Blocks | 1 | |
| Finishing ToolA wooden finishing tool that pairs with the overlay spades, mounted in a jack handle. | Fantlab | Paddles & Blocks | 1 | |
| Foot Board, Extra SmallA pair of cherry wood boards hinged with leather straps, for flattening and shaping feet. | Glass Toolbox (house brand) | Paddles & Blocks | 2 | |
| Foot Board, LargeA pair of cherry wood boards hinged with leather straps, for flattening and shaping feet. | Glass Toolbox (house brand) | Paddles & Blocks | 2 | |
| Foot Board, MediumA pair of cherry wood boards hinged with leather straps, for flattening and shaping feet. | Glass Toolbox (house brand) | Paddles & Blocks | 2 | |
| Foot Board, SmallA pair of cherry wood boards hinged with leather straps, for flattening and shaping feet. | Glass Toolbox (house brand) | Paddles & Blocks | 2 | |
| Foot Shaping SetTwo profile blocks and a counter-block for shaping feet the same way every time. | Fantlab | Paddles & Blocks | 1 | |
| Footing Tool, LargeA hinged cherrywood footing tool, 12" long with 4" panels. | R.R.R. Equipment | Paddles & Blocks | 1 | |
| Footing Tool, ShortA short hinged cherrywood footing tool, 6" long with 3" panels. | R.R.R. Equipment | Paddles & Blocks | 1 | |
| Footing Tool, SmallA hinged cherrywood footing tool, 11" long with 3" panels. | R.R.R. Equipment | Paddles & Blocks | 1 | |
| Goblet PaddleA narrow kiln-dried cherry paddle for goblet work, used to shape or as a heat shield, wet or dry. | Blockhead Tools | Paddles & Blocks | 6 | |
| Graal & Ariel BlockA wooden block for Graal and Ariel work, made in Fantlab's template shapes and numbered by largest inside diameter in millimeters. | Fantlab | Paddles & Blocks | 1 | |
| JACOB BlockJakobsson's classic oval block, CNC-milled from Swedish alder. | Jakobsson Sweden | Paddles & Blocks | 1 | |
| KARL BlockAn oval block for supersized work. | Jakobsson Sweden | Paddles & Blocks | 1 | |
| Kenova BlockA classic round knob block based on the late block maker Walter Evans's designs. The detachable handle (sold separately) can be set up ri... | Blockhead Tools | Paddles & Blocks | 1 | |
| Loading Paddle with Kevlar SleeveA cherrywood loading paddle with a heatproof Kevlar sleeve. | Leviathan GlassWorks | Paddles & Blocks | 1 | |
| Marble Ring Tool SetFour replaceable ring tools, 1.5" to 3", each on its own color-coded handle. | Leviathan GlassWorks | Paddles & Blocks | 1 | |
| Metal PaddleA 48" long metal paddle, used as a heat shield or for loading. | Hegan Glassworks (Hobbyglass) | Paddles & Blocks | 2 | |
| Mold BoardA 300 × 200 mm wooden board with slots across its face. | Fantlab | Paddles & Blocks | 1 | |
| Mr. Wizard's WonderblocksLightweight corked blocks for finishing paperweights that won't burn out of round. They need occasional re-corking and don't replace wood... | Jim Moore Glass Tools | Paddles & Blocks | 10 | |
| Newspaper KoozieA cover for a wet newspaper shaping pad: woven graphite on the working side, sewn with Kevlar thread, so the paper never touches the glass. | Standard Glass | Paddles & Blocks | 3 | |
| Optic BlockA custom block delivered as a set with a slightly oversized mold, for an even outside over an optic-patterned inside. | Fantlab | Paddles & Blocks | 1 | |
| Overlay SpadeA wooden spade for overlay work, mounted in a jack handle. | Fantlab | Paddles & Blocks | 1 | |
| Overlay TongsWooden tongs for overlay work, made to order in Swedish alder. | Jakobsson Sweden | Paddles & Blocks | 1 | |
| Paciofi SticksWooden paciofi sticks that fit Fantlab's stainless jack handles. | Fantlab | Paddles & Blocks | 1 | |
| PaddleA wooden paddle in three sizes. | Fantlab | Paddles & Blocks | 1 | |
| Paperweight BlockA rounded block for shaping paperweights. | Blockhead Tools | Paddles & Blocks | 1 | |
| Paperweight Finishing PaddleA 4" × 20" cherry paddle with 2", 2.5" and 3" holes for finishing paperweights. | Blockhead Tools | Paddles & Blocks | 1 | |
| Parchoffi Set, 1" × 12"A fine-grade cherry parchoffi set. | Leviathan GlassWorks | Paddles & Blocks | 1 | |
| Parchoffi Set, 3/4" × 10"A fine-grade cherry parchoffi set. | Leviathan GlassWorks | Paddles & Blocks | 1 | |
| Round Better Block, 10 cmA 10 cm round block head on a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Round Better Block, 11 cmA 11 cm round block head on a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Round Better Block, 12 cmA 12 cm round block head on a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Round Better Block, 13 cmA 13 cm round block head on a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Round Better Block, 14 cmA 14 cm round block head on a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Round Better Block, 15 cmA 15 cm round block head on a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Round Better Block, 16 cmA 16 cm round block head on a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Round Better Block, 18 cmA 18 cm round block head on a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Round Better Block, 20 cmA 20 cm round block head on a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Round Better Block, 22 cmA 22 cm round block head on a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 1 | |
| Round Better Block, 4 cmA 4 cm round block head on a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Round Better Block, 5 cmA 5 cm round block head on a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Round Better Block, 6 cmA 6 cm round block head on a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Round Better Block, 7 cmA 7 cm round block head on a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Round Better Block, 8 cmA 8 cm round block head on a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Round Better Block, 9 cmA 9 cm round block head on a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Shape Shifter Carbon Wool Pad, 9" × 10"A 1/4" carbon wool shaping pad, big enough to protect the hand and arm while shaping hot glass. | Leviathan GlassWorks | Paddles & Blocks | 0 | |
| Standard BlockA wooden block in Fantlab's two standard profiles, numbered by its largest inside diameter in centimeters. | Fantlab | Paddles & Blocks | 1 | |
| Student BlockAn extra-thick, full-bodied block built to last through heavy classroom use. | Blockhead Tools | Paddles & Blocks | 1 | |
| Swedish BlockA European-style diamond-shaped block with a more pointed, bullet-shaped tip than the Seattle style, which can save some marvering. | Blockhead Tools | Paddles & Blocks | 1 | |
| Swedish Oval Better Block, 10 cmA 10 cm Swedish-style oval block, CNC-cut, with a flat back for extra shaping. | Leviathan GlassWorks | Paddles & Blocks | 4 | |
| Swedish Oval Better Block, 11 cmA 11 cm oval Better Block with a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Swedish Oval Better Block, 12 cmA 12 cm Swedish-style oval block, CNC-cut, with a flat back for extra shaping. | Leviathan GlassWorks | Paddles & Blocks | 3 | |
| Swedish Oval Better Block, 13 cmA 13 cm oval Better Block with a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Swedish Oval Better Block, 14 cmA 14 cm Swedish-style oval block, CNC-cut, with a flat back for extra shaping. | Leviathan GlassWorks | Paddles & Blocks | 3 | |
| Swedish Oval Better Block, 15 cmA 15 cm oval Better Block with a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Swedish Oval Better Block, 16 cmA 16 cm Swedish-style oval block, CNC-cut, with a flat back for extra shaping. | Leviathan GlassWorks | Paddles & Blocks | 3 | |
| Swedish Oval Better Block, 18 cmAn 18 cm Swedish-style oval block, CNC-cut, with a flat back for extra shaping. | Leviathan GlassWorks | Paddles & Blocks | 3 | |
| Swedish Oval Better Block, 20 cmA 20 cm Swedish-style oval block, CNC-cut, with a flat back for extra shaping. | Leviathan GlassWorks | Paddles & Blocks | 3 | |
| Swedish Oval Better Block, 4 cmA 4 cm Swedish-style oval block, CNC-cut, with a flat back for extra shaping. | Leviathan GlassWorks | Paddles & Blocks | 3 | |
| Swedish Oval Better Block, 5 cmA 5 cm Swedish-style oval block, CNC-cut, with a flat back for extra shaping. | Leviathan GlassWorks | Paddles & Blocks | 3 | |
| Swedish Oval Better Block, 6 cmA 6 cm Swedish-style oval block, CNC-cut, with a flat back for extra shaping. | Leviathan GlassWorks | Paddles & Blocks | 4 | |
| Swedish Oval Better Block, 7 cmA 7 cm oval Better Block with a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Swedish Oval Better Block, 8 cmAn 8 cm Swedish-style oval block, CNC-cut, with a flat back for extra shaping. | Leviathan GlassWorks | Paddles & Blocks | 4 | |
| Swedish Oval Better Block, 9 cmA 9 cm oval Better Block with a removable, ergonomic handle. | Leviathan GlassWorks | Paddles & Blocks | 2 | |
| Swedish-Style Oval Block, 10 cmA 10 cm cherrywood oval block in the Swedish style, sold with a handle. | Block Party Blocks and Molds | Paddles & Blocks | 2 | |
| Swedish-Style Oval Block, 12 cmA 12 cm cherrywood oval block in the Swedish style, sold with a handle. | Block Party Blocks and Molds | Paddles & Blocks | 2 | |
| Swedish-Style Oval Block, 14 cmA 14 cm cherrywood oval block in the Swedish style, sold with a handle. | Block Party Blocks and Molds | Paddles & Blocks | 2 | |
| Swedish-Style Oval Block, 16 cmA 16 cm cherrywood oval block in the Swedish style, sold with a handle. | Block Party Blocks and Molds | Paddles & Blocks | 2 | |
| Swedish-Style Oval Block, 18 cmAn 18 cm Swedish-style cherry block. | Block Party Blocks and Molds | Paddles & Blocks | 1 | |
| Swedish-Style Oval Block, 6 cmA 6 cm cherrywood oval block in the Swedish style, sold with a handle. | Block Party Blocks and Molds | Paddles & Blocks | 2 | |
| Swedish-Style Oval Block, 8 cmA 8 cm cherrywood oval block in the Swedish style, sold with a handle. | Block Party Blocks and Molds | Paddles & Blocks | 2 | |
| The ForkA forked, channeled paddle for straightening lips and paddling around the punty. It can also shield a gaffer's hand at the jack blades. | Watanabe Glass Tools | Paddles & Blocks | 1 | |
| Wood PaddleA wooden paddle blade, with a separate 160 mm handle available. | Maruko Tools | Paddles & Blocks | 1 | |
| Wooden Block, BallA ball-shaped wooden block made from European wood. | Masters of Glass | Paddles & Blocks | 1 | |
| Wooden Block, EggAn egg-shaped wooden block made from European wood. | Masters of Glass | Paddles & Blocks | 1 | |
| 0.375" Solid Weighted Punty RodAn Italian-style counterweighted solid punty on a 3/8" stainless shaft. | Steinert Industries | Blowpipes & Punties | 1 | |
| 0.5" Hollow Punty RodA stainless hollow punty with good balance and a smooth transition from pipe to punty, with a stop collar and grip. | Steinert Industries | Blowpipes & Punties | 1 | |
| 0.5" Small Light BlowpipeA small pipe for ornaments and other small work. | Steinert Industries | Blowpipes & Punties | 1 | |
| 0.5" Solid Punty RodA solid stainless punty rod with a stop collar and grip. | Steinert Industries | Blowpipes & Punties | 1 | |
| 0.625" Extra Light Series BlowpipeA scaled-down pipe for small, delicate pieces. | Steinert Industries | Blowpipes & Punties | 1 | |
| 0.75" Bit IronA stainless bit iron for quick bit work, with a 2" head on a 1/2" shaft. | Steinert Industries | Blowpipes & Punties | 1 | |
| 0.75" Extra Light Series BlowpipeA scaled-down pipe for small, delicate pieces. | Steinert Industries | Blowpipes & Punties | 1 | |
| 0.75" Hollow Punty RodA stainless hollow punty with good balance and a smooth transition from pipe to punty, with a stop collar and grip. | Steinert Industries | Blowpipes & Punties | 1 | |
| 0.75" Standard Series BlowpipeSteinert's standard pipe, balancing weight, strength, and comfort. | Steinert Industries | Blowpipes & Punties | 1 | |
| 0.875" Match 2 Punty RodA punty made to match the 2" Large Head pipe, with the strength and balance for large pieces. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1" Bit IronA stainless bit iron for quick bit work, with a 2" head on a 1/2" shaft. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1" Extra Light Series BlowpipeA scaled-down pipe for small, delicate pieces. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1" Heavy Weight Series BlowpipeA thicker-walled pipe for strength with heavy pieces. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1" Large Head Series Blowpipe with 0.875" ShaftA pipe for blowing very large or heavy pieces. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1" Light Line Series BlowpipeA sister to the Standard series with a lightened head. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1" Match 2 Punty RodA punty made to match the 2" Large Head pipe, with the strength and balance for large pieces. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1" Standard Series BlowpipeSteinert's standard pipe, balancing weight, strength, and comfort. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1" Straight PuntySpiral Arts' basic large punty, for solid work and for large pieces where someone else turns for the gaffer. | Spiral Arts | Blowpipes & Punties | 1 | |
| 1-1/8" Straight PuntyAn extra-large chromoly punty for large pieces. The flared head gives the punty more support. | Spiral Arts | Blowpipes & Punties | 1 | |
| 1.25" Heavy Weight Series BlowpipeA thicker-walled pipe for strength with heavy pieces. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1.25" Large Head Series Blowpipe with 0.875" ShaftA pipe for blowing very large or heavy pieces. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1.25" Large Head Series Blowpipe with 1" ShaftA pipe for blowing very large or heavy pieces. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1.25" Light Line Series BlowpipeA sister to the Standard series with a lightened head. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1.25" Standard Series BlowpipeSteinert's standard pipe, balancing weight, strength, and comfort. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1.5" Heavy Weight Series BlowpipeA thicker-walled pipe for strength with heavy pieces. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1.5" Large Head Series Blowpipe with 0.875" ShaftA pipe for blowing very large or heavy pieces. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1.5" Large Head Series Blowpipe with 1" ShaftA pipe for blowing very large or heavy pieces. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1.5" Light Line Series BlowpipeA sister to the Standard series with a lightened head. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1.5" Solid Gathering RodA stainless gathering rod with a 1.5" solid ball on a 1/2" shaft, with a stop collar and grip. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1.5" Standard Series BlowpipeSteinert's standard pipe, balancing weight, strength, and comfort. | Steinert Industries | Blowpipes & Punties | 1 | |
| 1/2" Solid PuntyA standard solid 1/2" bit rod for small punty and bit work. | R.R.R. Equipment | Blowpipes & Punties | 1 | |
| 1/2" Solid Punty, Step DownA 1/2" step-down punty for smaller work like cups and goblets. | R.R.R. Equipment | Blowpipes & Punties | 1 | |
| 1/2" Straight PuntyA slim rod for bringing bits and handles, which can also stand in as a small punty. | Spiral Arts | Blowpipes & Punties | 1 | |
| 2" Large Head Series Blowpipe with 0.875" ShaftA pipe for blowing very large or heavy pieces. | Steinert Industries | Blowpipes & Punties | 1 | |
| 2" Large Head Series Blowpipe with 1" ShaftA pipe for blowing very large or heavy pieces. | Steinert Industries | Blowpipes & Punties | 1 | |
| 3/4" Hollow PuntyA standard 3/4" hollow punty. | R.R.R. Equipment | Blowpipes & Punties | 1 | |
| 3/4" Hollow Punty, Step DownA 3/4" hollow punty with a step-down head. | R.R.R. Equipment | Blowpipes & Punties | 1 | |
| 3/4" Straight PuntyA rigid, durable general-purpose punty, the kind most glassblowers learn on. | Spiral Arts | Blowpipes & Punties | 1 | |
| 3/4" Ultralight Straight PuntyA thin-walled, lighter version of the 3/4" Straight Punty. | Spiral Arts | Blowpipes & Punties | 1 | |
| 7/16" Straight PuntyAn all-stainless 7/16" rod for bits and handles, or a small punty in a pinch. | Spiral Arts | Blowpipes & Punties | 1 | |
| 7/8" Straight PuntyA heavy-duty 7/8" straight punty for larger work. | Spiral Arts | Blowpipes & Punties | 1 | |
| 9/16" Solid PuntyA solid 9/16" bit rod for work that doesn't need a full 3/4" rod. | R.R.R. Equipment | Blowpipes & Punties | 1 | |
| 9/16" Solid Punty, Step DownA solid 9/16" step-down bit rod for work a little too big for a 1/2" rod. | R.R.R. Equipment | Blowpipes & Punties | 1 | |
| Basic Big PipeSpiral Arts' most popular large pipe, with a double-welded, reinforced head for big work. | Spiral Arts | Blowpipes & Punties | 1 | |
| Basic Small PuntyA popular small, hollow, counterweighted punty for work made on a Large Cup pipe or 1–2 gather work. | Spiral Arts | Blowpipes & Punties | 1 | |
| Blow Hose AssemblyA 7' latex blow hose with a right-angle brass swivel, two mouthpieces, and silicone adapters for 15–16 mm and 18–19 mm pipes. | Mountain Glass Art | Blowpipes & Punties | 5 | |
| Blow Hose KitA 200 cm silicone blow hose with three pipe adapters and spare mouthpieces in a carry case, for blowing alone. | Glass Toolbox (house brand) | Blowpipes & Punties | 1 | |
| Blowhose ExtensionA 6' latex blow hose on a 90° swivel that slides over the pipe's mouthpiece, so you can blow at the bench or glory hole. | Hegan Glassworks (Hobbyglass) | Blowpipes & Punties | 3 | |
| Blowpipe ExtenderA rotating mouthpiece that fits the end of a blowpipe, for comfort and to protect teeth when bench blowing. | Glass Toolbox (house brand) | Blowpipes & Punties | 2 | |
| Blowpipe Hose ExtensionA 6' latex blow hose on a 90° swivel that slides over the blowpipe's mouthpiece, so you can blow while working at the bench or glory hole. | Steinert Industries | Blowpipes & Punties | 6 | |
| Blowpipe, 14x 22x 1400mmA Murano-made blowpipe, 140 cm long. | Carlo Donà | Blowpipes & Punties | 2 | |
| Blowpipe, 17x30x1450mmA Murano-made blowpipe, 145 cm long. | Carlo Donà | Blowpipes & Punties | 2 | |
| Blowpipe, 21x35mm-Rubber HandleA Murano-made blowpipe with a rubber grip, 145 cm long. | Carlo Donà | Blowpipes & Punties | 2 | |
| Blowpipe, 25x40mm - Rubber HandleA Murano-made blowpipe with a rubber grip, 150 cm long. | Carlo Donà | Blowpipes & Punties | 2 | |
| Blowpipe, 27x40mm - Rubber HandleA Murano-made blowpipe with a rubber grip, 160 cm long. | Carlo Donà | Blowpipes & Punties | 2 | |
| Blowpipe, 33x50mm - Rubber HandleA Murano-made blowpipe with a rubber grip, 160 cm long. | Carlo Donà | Blowpipes & Punties | 2 | |
| BlowpipesMade-to-order blowpipes with carbon or stainless steel heads, plastic or brass mouthpieces, and custom sizes on request. | Jakobsson Sweden | Blowpipes & Punties | 1 | |
| BlowpipesUniversal and specialized glassblowing pipes made in Novotný Glass's own metal workshop. | Novotný Glass Tools | Blowpipes & Punties | 1 | |
| Cup PuntyA solid 10 mm counterweighted punty sized for delicate cup work. | Spiral Arts | Blowpipes & Punties | 1 | |
| Extra Large PuntyA counterweighted punty for large vessels and solid work. | Spiral Arts | Blowpipes & Punties | 1 | |
| Extra Large Standard PipeAn all-purpose pipe for medium to large pieces. | Spiral Arts | Blowpipes & Punties | 1 | |
| Fat Head Cup PipeA cup pipe with a larger, more sharply tapered head and a small 1/8" bore. It was originally made for staff at The Studio at the Corning ... | Spiral Arts | Blowpipes & Punties | 1 | |
| Gathering IronsSolid gathering irons in three diameters. | Essemce | Blowpipes & Punties | 1 | |
| Jumbo PipeThe largest pipe Spiral Arts makes, with a reinforced flared head and an extra-long hose grip. | Spiral Arts | Blowpipes & Punties | 1 | |
| Large Cup PipeA cup pipe with a bigger head for larger gathers, good for big cups and small bowls. | Spiral Arts | Blowpipes & Punties | 1 | |
| Large Cup PuntyA small, hollow, counterweighted punty with more stability than the Cup Punty. | Spiral Arts | Blowpipes & Punties | 1 | |
| Large Standard PuntyA counterweighted punty for a wide range of large work. | Spiral Arts | Blowpipes & Punties | 1 | |
| Punties and RodsMade-to-order punties and rods from Jakobsson's own metal shop, in carbon or stainless steel. | Jakobsson Sweden | Blowpipes & Punties | 1 | |
| PuntyMurano punties with or without a handle, in over thirty body and head sizes. | Carlo Donà | Blowpipes & Punties | 1 | |
| Punty Rod, 1/2"A solid 1/2" stainless bit rod for small punty and bit work. | R.R.R. Equipment | Blowpipes & Punties | 1 | |
| Small Standard Cup PipeA smaller cup pipe for blown stems, hollow handles, and small cups. | Spiral Arts | Blowpipes & Punties | 1 | |
| Small Standard PuntyA counterweighted punty for medium work. It pairs with the Standard Workhorse and Large Cup pipes. | Spiral Arts | Blowpipes & Punties | 1 | |
| Spare MouthpiecesFour spare mouthpieces for Glass Toolbox's blow-hose kits and blowpipe extenders. | Glass Toolbox (house brand) | Blowpipes & Punties | 1 | |
| Stainless BlowpipesStainless blowpipes with a stainless nozzle and tube, in twelve nozzle and tube combinations from 20 × 14 to 50 × 25 mm. | Essemce | Blowpipes & Punties | 1 | |
| Stainless Hand Rod with HandleA stainless hand rod with a handle, in four diameters. | Carlo Donà | Blowpipes & Punties | 1 | |
| Stainless PontilsStainless steel pontils, straight or step-down, from 14 to 25 mm. | Essemce | Blowpipes & Punties | 1 | |
| Standard Cup PipeThe everyday cup pipe for goblet and cup makers. | Spiral Arts | Blowpipes & Punties | 1 | |
| Standard Workhorse BlowpipeA carbon-steel blowpipe with a stainless reducer and head, made by hand in Canada to order. | Lake Winnipeg Glassworks | Blowpipes & Punties | 1 | |
| Standard Workhorse PipeSpiral Arts' general-purpose blowpipe, suitable for anyone from a first-year student to a production blower. | Spiral Arts | Blowpipes & Punties | 1 | |
| Standard Workhorse PuntyA carbon-steel punty made by hand in Canada to order, with a standard head or a step-down head. | Lake Winnipeg Glassworks | Blowpipes & Punties | 1 | |
| Standard Workhorse PuntyA counterweighted punty for 3–4 gather pieces made on a Standard Workhorse pipe. | Spiral Arts | Blowpipes & Punties | 1 | |
| Standard Workhorse Ultralight PipeA thin-walled, lighter Standard Workhorse with a 1" head, meant for production blowers lifting pipes all day. | Spiral Arts | Blowpipes & Punties | 1 | |
| Studio Standard Blowpipe, 3/4"A 55" Hegan blowpipe with a stainless head, in chromoly or stainless steel. | Hegan Glassworks (Hobbyglass) | Blowpipes & Punties | 3 | |
| Studio Standard Straight PuntyA Hegan stainless steel punty, straight or with a step-down nose for a smaller punty mark. | Hegan Glassworks (Hobbyglass) | Blowpipes & Punties | 4 | |
| Hand TorchMurano hand torches for spot-heating in the hot shop, from 6 to 64 flames. | Carlo Donà | Torches | 2 | |
| Hand Torch Burner KitA propane hand torch kit: trigger handle with pilot valve, 4" extension tube, open burner tip, hose, regulator and striker. | Exact | Torches | 9 | |
| Mid-Range Hot TorchA Nortel Mid-Range bench burner fitted with Jasen Johnsen's purpleheart handle and a loop for hanging on a gas saver. | Jasen Johnsen Glass Tools | Torches | 1 | |
| Red Max Hand TorchA hand torch for spot-heating in the hot shop. | Nortel Machinery | Torches | 1 | |
| Color Bar ChopperA bench chopper for breaking color bar into usable pieces cleanly instead of shattering it. Olympic Color Rods uses one daily. | Spiral Arts | Color Tools | 1 | |
| Kiln TrayA ceramic tray with eight cells that keeps color chunks sorted and upright in the kiln. | Bugeye Products | Color Tools | 2 | |
| Murrini ChopperA bench chopper that cuts four 1/2" canes at a time into murrine, and doubles as a color bar chopper with an adjustable cutter height. | Hegan Glassworks (Hobbyglass) | Color Tools | 1 | |
| Pi DividerA divider for spacing cane or stripes evenly around a circumference, in five sizes. | Carlo Donà | Color Tools | 2 | |
| Pi DividerA layout tool for cane pick-ups and roll-ups. It divides a circumference evenly, so you don't have to do the pi math. | Cutting Edge Products (Red Hot Metal) | Color Tools | 2 | |
| Pi DividerMeasures a layout of cane with its straight arms and gives the collar size needed with its curved end. | Jim Moore Glass Tools | Color Tools | 4 | |
| Threading MachineAn adjustable jig for winding consistent spiral threads. It locks in position and has an angle gauge for repeatable setups. | Spiral Arts | Color Tools | 1 | |
| Threading WheelA multi-position benchtop threading wheel for winding threads. Replacement bearings and bushings are available. | Steinert Industries | Color Tools | 1 | |
| Twisty BitA drill-driven bit that holds the end of a cane pull, for tighter, more even twists without waiting on a post. | Bugeye Products | Color Tools | 5 | |
| 1" Ball ToolA single inside-sculpting tool with a 1" solid steel ball. | Jasen Johnsen Glass Tools | Sculpting Tools | 3 | |
| 1.5" Ball ToolA single inside-sculpting tool with a 1.5" hollow steel ball. | Jasen Johnsen Glass Tools | Sculpting Tools | 3 | |
| 10" TagliolA stainless steel tagliol with a 10" paddle. | Steinert Industries | Sculpting Tools | 1 | |
| 2" Ball ToolA single inside-sculpting tool with a 2" hollow steel ball. | Jasen Johnsen Glass Tools | Sculpting Tools | 2 | |
| 8" TagliolA stainless steel tagliol with an 8" paddle. | Steinert Industries | Sculpting Tools | 1 | |
| John Moran TaglioA heavy sculpting taglio modeled on John "Sleepy" Moran's, with a hardened spring steel blade and a counterweighted handle. | BC Metalworking | Sculpting Tools | 1 | |
| Large Inside Sculpting Tools (Set of 5)Heavier ball-ended rods for sculpting from inside a bubble. | Jasen Johnsen Glass Tools | Sculpting Tools | 3 | |
| Large Round End TaglioAn 8" round-end taglio for larger sculpting and color overlays. | Jasen Johnsen Glass Tools | Sculpting Tools | 3 | |
| Large Square End TaglioA 7" square-end taglio for larger work and color overlays. | Jasen Johnsen Glass Tools | Sculpting Tools | 1 | |
| Long Handle Tagliol PaddleThe Short Tagliol's blade on a longer 9" handle. | Cutting Edge Products (Red Hot Metal) | Sculpting Tools | 2 | |
| Medium Round End TaglioA 6" round-end taglio for small to medium work, especially color overlays. | Jasen Johnsen Glass Tools | Sculpting Tools | 2 | |
| Medium Square End TaglioA 6" square-end taglio for small to medium work, especially color overlays. | Jasen Johnsen Glass Tools | Sculpting Tools | 2 | |
| Mini Tagliol PaddleThe small-paddle version of the Cutting Edge tagliol, for finer sculpting and scoring. | Cutting Edge Products (Red Hot Metal) | Sculpting Tools | 2 | |
| Roller - Dragon Scale, LargeA texture roller that presses a dragon-scale pattern into hot glass. | Carlo Donà | Sculpting Tools | 2 | |
| Roller - Dragon Scale, SmallA texture roller that presses a dragon-scale pattern into hot glass. | Carlo Donà | Sculpting Tools | 2 | |
| Roller - Morise, LargeA roller for making morise, the pinched decorative trails of Venetian glass. | Carlo Donà | Sculpting Tools | 2 | |
| Roller - Morise, SmallA roller for making morise, the pinched decorative trails of Venetian glass. | Carlo Donà | Sculpting Tools | 2 | |
| Roller - Salmon Scale, LargeA texture roller that presses a salmon-scale pattern into hot glass. | Carlo Donà | Sculpting Tools | 2 | |
| Roller - Salmon Scale, SmallA texture roller that presses a salmon-scale pattern into hot glass. | Carlo Donà | Sculpting Tools | 2 | |
| Roller - Snake Scale, LargeA texture roller that presses a snake-scale pattern into hot glass. | Carlo Donà | Sculpting Tools | 2 | |
| Roller - Snake Scale, SmallA texture roller that presses a snake-scale pattern into hot glass. | Carlo Donà | Sculpting Tools | 2 | |
| Round Tagliol w/ Steel Handle, LargeA round, tapered ("pino") tagliol with a steel handle for sculpting, flattening, and scoring. | Carlo Donà | Sculpting Tools | 2 | |
| Round Tagliol w/ Steel Handle, SmallA round, tapered ("pino") tagliol with a steel handle for sculpting, flattening, and scoring. | Carlo Donà | Sculpting Tools | 2 | |
| Round Tagliol w/ Wood Handle, LargeA round, tapered ("pino") tagliol with a wood handle for sculpting, flattening, and scoring. | Carlo Donà | Sculpting Tools | 2 | |
| Round Tagliol w/ Wood Handle, SmallA round, tapered ("pino") tagliol with a wood handle for sculpting, flattening, and scoring. | Carlo Donà | Sculpting Tools | 2 | |
| Sculpting KnifeA 5" stainless knife for detailed sculpting. | Jasen Johnsen Glass Tools | Sculpting Tools | 2 | |
| Sculpting Tool, 30mmA sculpting tool with a 30 mm ball end. | Carlo Donà | Sculpting Tools | 1 | |
| Sculpting Tool, 35mmA sculpting tool with a 35 mm ball end. | Carlo Donà | Sculpting Tools | 1 | |
| Sculpting Tool, 40mmA sculpting tool with a 40 mm ball end. | Carlo Donà | Sculpting Tools | 1 | |
| Sculpting Tool, 50mmA sculpting tool with a 50 mm ball end. | Carlo Donà | Sculpting Tools | 1 | |
| Sculpting Tool, 5mmA sculpting tool with a 5 mm ball end. | Carlo Donà | Sculpting Tools | 1 | |
| Short Tagliol PaddleAn Italian-style stainless tagliol with a big paddle for sculpting, flattening, and scoring hot glass. | Cutting Edge Products (Red Hot Metal) | Sculpting Tools | 2 | |
| Small Inside Sculpting Tools (Set of 5)Ball-ended rods for sculpting from inside a bubble, pushing material outward. | Jasen Johnsen Glass Tools | Sculpting Tools | 3 | |
| Small Round End TaglioA 5" taglio for small work. The rounded end can also be used for sculpting. | Jasen Johnsen Glass Tools | Sculpting Tools | 2 | |
| Small Square End TaglioA 5" taglio for small work. The square end can also be used for sculpting. | Jasen Johnsen Glass Tools | Sculpting Tools | 2 | |
| Square Tagliol w/ Steel Handle, LargeA square tagliol with a steel handle for sculpting, flattening, and scoring. | Carlo Donà | Sculpting Tools | 2 | |
| Square Tagliol w/ Steel Handle, SmallA square tagliol with a steel handle for sculpting, flattening, and scoring. | Carlo Donà | Sculpting Tools | 3 | |
| Square Tagliol w/ Wood Handle, LargeA square tagliol with a wood handle for sculpting, flattening, and scoring. | Carlo Donà | Sculpting Tools | 2 | |
| Square Tagliol w/ Wood Handle, SmallA square tagliol with a wood handle for sculpting, flattening, and scoring. | Carlo Donà | Sculpting Tools | 2 | |
| TaglioA small taglio made to order. | Maruko Tools | Sculpting Tools | 1 | |
| TagliolA tagliol for sculpting solid areas without chilling the surface much. | Jim Moore Glass Tools | Sculpting Tools | 3 | |
| Tungsten Needle PincerA pincer with tungsten needles for making holes. | Carlo Donà | Sculpting Tools | 1 | |
| Tungsten NeedlesTungsten needles, from the maker's crimp and tweezer range. | Carlo Donà | Sculpting Tools | 1 | |
| Tungsten Pick Tool with ProbeA tungsten pick with a probe end, handmade by Jasen Johnsen. | Jasen Johnsen Glass Tools | Sculpting Tools | 1 | |
| Tungsten Probe, 1.6mmA 1.6 mm tungsten probe for picking and piercing hot glass. | Carlo Donà | Sculpting Tools | 2 | |
| Tungsten Probe, 2.4mmA 2.4 mm tungsten probe for picking and piercing hot glass. | Carlo Donà | Sculpting Tools | 2 | |
| Tungsten Probe, 2mmA 2 mm tungsten probe for picking and piercing hot glass. | Carlo Donà | Sculpting Tools | 2 | |
| Tungsten Probe, 3.2mmA 3.2 mm tungsten probe for picking and piercing hot glass. | Carlo Donà | Sculpting Tools | 2 | |
| Tungsten with HandleA tungsten pick in a turned aluminum handle for making holes in glass. | Jasen Johnsen Glass Tools | Sculpting Tools | 2 | |
| Angled Feather CrimpA crimp that presses angled lines for feathers. | Jasen Johnsen Glass Tools | Crimps & Presses | 3 | |
| Crimp Tweezer Spoons 35mmConvex-handle crimp tweezers with spoon plates. | Carlo Donà | Crimps & Presses | 2 | |
| Crimp Tweezer Spoons 40mmConvex-handle crimp tweezers with spoon plates. | Carlo Donà | Crimps & Presses | 2 | |
| Crimp Tweezers - Big PlatesConvex-handle crimp tweezers with extra-large plates. | Carlo Donà | Crimps & Presses | 1 | |
| Crimp Tweezers - ChandelierConvex-handle crimp tweezers with chandelier plates. | Carlo Donà | Crimps & Presses | 2 | |
| Crimp Tweezers - ConesConvex-handle crimp tweezers with cone plates. | Carlo Donà | Crimps & Presses | 1 | |
| Crimp Tweezers - CoppoConvex-handle crimp tweezers with coppo plates. | Carlo Donà | Crimps & Presses | 2 | |
| Crimp Tweezers - Dragon Wing, LargeConvex-handle crimp tweezers with dragon wing plates. | Carlo Donà | Crimps & Presses | 2 | |
| Crimp Tweezers - Dragon Wing, SmallConvex-handle crimp tweezers with dragon wing plates. | Carlo Donà | Crimps & Presses | 2 | |
| Crimp Tweezers - Elio's Dragon WingsConvex-handle crimp tweezers with Elio's dragon wings plates. | Carlo Donà | Crimps & Presses | 2 | |
| Crimp Tweezers - Eyes, 10mmConvex-handle crimp tweezers with eye plates. | Carlo Donà | Crimps & Presses | 2 | |
| Crimp Tweezers - Eyes, 8mmConvex-handle crimp tweezers with eye plates. | Carlo Donà | Crimps & Presses | 2 | |
| Crimp Tweezers - Flat AngleConvex-handle crimp tweezers with angled flat plates. | Carlo Donà | Crimps & Presses | 1 | |
| Crimp Tweezers - Flat NarrowConvex-handle crimp tweezers with flat narrow plates. | Carlo Donà | Crimps & Presses | 3 | |
| Crimp Tweezers - Flat Wide, LargeConvex-handle crimp tweezers with flat wide plates. | Carlo Donà | Crimps & Presses | 2 | |
| Crimp Tweezers - Flat Wide, SmallConvex-handle crimp tweezers with flat wide plates. | Carlo Donà | Crimps & Presses | 3 | |
| Crimp Tweezers - Leaf, SmallConvex-handle crimp tweezers with leaf plates. | Carlo Donà | Crimps & Presses | 2 | |
| Crimp Tweezers - Lined, NarrowConvex-handle crimp tweezers with lined narrow plates. | Carlo Donà | Crimps & Presses | 2 | |
| Crimp Tweezers - Lines-GatoiConvex-handle crimp tweezers with gatoi-line (three big teeth) plates. | Carlo Donà | Crimps & Presses | 2 | |
| Crimp Tweezers - Parramore RoseConvex-handle crimp tweezers for Parramore-style roses. | Carlo Donà | Crimps & Presses | 1 | |
| Crimp Tweezers - Plisse ClampConvex-handle crimp tweezers with plisse clamp plates. | Carlo Donà | Crimps & Presses | 2 | |
| Crimp Tweezers - Prunts MoriseConvex-handle crimp tweezers with prunt (morise) plates. | Carlo Donà | Crimps & Presses | 2 | |
| Crimp Tweezers - Rose Petal, LargeConvex-handle crimp tweezers with rose petal plates. | Carlo Donà | Crimps & Presses | 2 | |
| Crimp Tweezers - Rose Petal, SmallConvex-handle crimp tweezers with rose petal plates. | Carlo Donà | Crimps & Presses | 3 | |
| Crimp Tweezers - Waffle, LargeConvex-handle crimp tweezers with waffle plates. | Carlo Donà | Crimps & Presses | 2 | |
| Crimp Tweezers - Waffle, MediumConvex-handle crimp tweezers with waffle plates. | Carlo Donà | Crimps & Presses | 2 | |
| Crimp Tweezers, FuinConvex-handle crimp tweezers with Fuin (Davide Fuin style) plates. | Carlo Donà | Crimps & Presses | 2 | |
| Extra Convex Handle Crimp TweezersCrimp tweezers with extra-convex handles, in the standard crimp patterns. | Carlo Donà | Crimps & Presses | 1 | |
| Fan CrimpA crimp with a milled steel fan pad. | Jim Moore Glass Tools | Crimps & Presses | 2 | |
| Fine Leaf CrimpA very fine leaf-texture crimp for delicate leaves and feathers. | Jim Moore Glass Tools | Crimps & Presses | 2 | |
| Fine Ribbed CrimpA small crimp with finely ribbed bronze pads. | Jim Moore Glass Tools | Crimps & Presses | 2 | |
| Flat CrimpA flat crimp in four pad widths. | Jim Moore Glass Tools | Crimps & Presses | 6 | |
| Flat Crimp TweezerFlat crimps (mashers) with long, maneuverable handles and rounded tips that don't leave angular marks. | Jasen Johnsen Glass Tools | Crimps & Presses | 1 | |
| Large Narrow Flat CrimpA flat crimp for larger flowers and sculpting. | Jasen Johnsen Glass Tools | Crimps & Presses | 2 | |
| Large Wide Flat CrimpA wide flat crimp for flattening larger bits in sculpture. | Jasen Johnsen Glass Tools | Crimps & Presses | 1 | |
| Large “V” CrimpA crimp for pinching V shapes and sharp edges on flat work. | Jasen Johnsen Glass Tools | Crimps & Presses | 2 | |
| Leaf CrimpA crimp that presses a leaf-vein pattern. | Jim Moore Glass Tools | Crimps & Presses | 2 | |
| Ridged CrimpA crimp for heavy texture like feathers and leaves. It also holds parts during sculpture assembly. | Jasen Johnsen Glass Tools | Crimps & Presses | 3 | |
| Ridged Crimp FineA finer ridged crimp for light texture in feathers and leaves. | Jasen Johnsen Glass Tools | Crimps & Presses | 2 | |
| Rigadin Crimp for Chandelier LeavesA large ribbed crimp for chandelier leaves. | Carlo Donà | Crimps & Presses | 1 | |
| Rose CrimpA crimp with 2" pads for pinching petals and similar sculptural details. | BC Metalworking | Crimps & Presses | 2 | |
| Rose CrimpA steel-padded crimp for rose petals. | Jim Moore Glass Tools | Crimps & Presses | 2 | |
| Small Narrow Flat CrimpA narrow flat crimp for small flowers and sculpting. Also good for lampworking. | Jasen Johnsen Glass Tools | Crimps & Presses | 2 | |
| Small “V” CrimpA small V crimp for V shapes, faces, and figures. | Jasen Johnsen Glass Tools | Crimps & Presses | 3 | |
| Special Small CrimpsShort 230 mm crimps for morise, flat, lines, leaf, and prunt work. | Carlo Donà | Crimps & Presses | 1 | |
| Straight CrimpA straight ribbed crimp with 8 grooves per inch, in four pad widths. | Jim Moore Glass Tools | Crimps & Presses | 5 | |
| Super Narrow Flat CrimpAn extra-narrow flat crimp for petals and leaves with a different look. | Jasen Johnsen Glass Tools | Crimps & Presses | 1 | |
| Textured Small CrimpsSmall crimps with two textured 1" pads of your choice from 21 patterns. | Jim Moore Glass Tools | Crimps & Presses | 5 | |
| Tweezer - Leaf MasherMasher tweezers with leaf plates for flattening and texturing bits. | Carlo Donà | Crimps & Presses | 2 | |
| Tweezer - Lined MasherMasher tweezers with lined plates for flattening and texturing bits. | Carlo Donà | Crimps & Presses | 2 | |
| Tweezer, Waffle MasherMasher tweezers with waffle plates for flattening and texturing bits. | Carlo Donà | Crimps & Presses | 2 | |
| V-Angle Crimp TweezersCrimp tweezers with a V-angle head for shaping corners and edges. | Jasen Johnsen Glass Tools | Crimps & Presses | 1 | |
| Wide Flat Masher, LargeA sprung masher with a much wider head than the flat crimps, for crimping and flattening hot glass. | Jasen Johnsen Glass Tools | Crimps & Presses | 1 | |
| 3" Round Bottom MoldMiniature round-bottom bronze molds with triangular ribs that meet at a point at the bottom. | Hegan Glassworks (Hobbyglass) | Molds & Stamps | 7 | |
| 4" 8-Point Star MoldA 4" bronze star-shaped optic mold with eight points and an open, flat bottom. | Hegan Glassworks (Hobbyglass) | Molds & Stamps | 1 | |
| 4" Diamond MoldA 4" bronze diamond mold that makes lens-like windows. The 16-point version gives bigger windows but is harder to release; the 20-point i... | Hegan Glassworks (Hobbyglass) | Molds & Stamps | 1 | |
| 4" Flat Bottom Optic MoldA 4" bronze optic mold with narrow-tapered triangular ribs for goblet tops, ornaments, and other small work. It also holds cane for warmi... | Hegan Glassworks (Hobbyglass) | Molds & Stamps | 6 | |
| 4" Hexagon MoldA 4" bronze mold with six flat sides and an open, flat bottom. | Hegan Glassworks (Hobbyglass) | Molds & Stamps | 1 | |
| 4" Mezzostampo MoldA specialty 4" mold with twelve square, narrow-tapered ribs, made for half-stamped (mezzostampo) goblet tops. | Hegan Glassworks (Hobbyglass) | Molds & Stamps | 2 | |
| 4" Narrow Optic MoldA 4" bronze optic mold that tapers quickly to a closed, concave bottom, for narrow forms. | Hegan Glassworks (Hobbyglass) | Molds & Stamps | 6 | |
| 4" Round Bottom Optic MoldA 4" bronze optic mold with triangular ribs, designed for goblet tops and also good for ornaments and pumpkin stems. | Hegan Glassworks (Hobbyglass) | Molds & Stamps | 7 | |
| 5" Round Bottom Optic MoldA 5" bronze optic mold whose ribs taper to a closed, concave bottom. | Hegan Glassworks (Hobbyglass) | Molds & Stamps | 6 | |
| 6" Diamond MoldA 6" bronze diamond mold. | Hegan Glassworks (Hobbyglass) | Molds & Stamps | 1 | |
| 6" Flat Bottom Optic MoldA 6" bronze optic mold with triangular ribs and nearly straight sides. It also holds cane for warming in an oven. | Hegan Glassworks (Hobbyglass) | Molds & Stamps | 4 | |
| 6" Round Bottom Optic MoldA 6" round-bottom bronze optic mold with triangular ribs. You don't have to cut off the bottom of the bubble after blowing, which saves t... | Hegan Glassworks (Hobbyglass) | Molds & Stamps | 4 | |
| 6" Spring MoldA 6" steel coil mold. The finished glass has to be screwed out of the coil to release it. | Jim Moore Glass Tools | Molds & Stamps | 2 | |
| 8" Diamond MoldAn 8" investment-cast bronze diamond mold that leaves lens-like windows on the piece. | Hegan Glassworks (Hobbyglass) | Molds & Stamps | 1 | |
| American Pint Glass MoldAn Archetype mold for an American pint glass, in wood or graphite. | Blockhead Tools | Molds & Stamps | 2 | |
| Bauble Ornament MoldAn Archetype wood mold for a bauble ornament. | Blockhead Tools | Molds & Stamps | 1 | |
| Bronze Optic Dip Mold (Custom)A bronze optic dip mold that can be customized to your own design and size. | Eclipse Casting | Molds & Stamps | 1 | |
| Champagne Flute MoldAn Archetype wood mold for a champagne flute. | Blockhead Tools | Molds & Stamps | 1 | |
| Chardonnay Glass MoldAn Archetype wood mold for a hot-pop chardonnay glass. | Blockhead Tools | Molds & Stamps | 1 | |
| Cherrywood Mold, 3" × 5" CupA cherrywood mold for a straight-sided cup, 3" across and 5" tall. | Block Party Blocks and Molds | Molds & Stamps | 1 | |
| Cherrywood Mold, 3" × 5" TumblerA cherrywood mold for a straight-sided tumbler, 3" across and 5" tall. | Block Party Blocks and Molds | Molds & Stamps | 1 | |
| Cherrywood Mold, 3.25" × 3.75" Stemless Wine GlassA cherrywood mold for a curvy stemless wine glass, 3.25" at its widest and 3.75" tall. | Block Party Blocks and Molds | Molds & Stamps | 1 | |
| Classical Amphora MoldAn Archetype wood mold for a classical amphora, in three heights. | Blockhead Tools | Molds & Stamps | 3 | |
| Custom 3 in StampThe largest custom brass stamp Protostamps cuts, made from your logo or design. | Protostamps | Molds & Stamps | 1 | |
| Custom 50 mm StampA custom brass or graphite stamp from your logo or design, sized for large cup bottoms and flat ornaments. | Protostamps | Molds & Stamps | 1 | |
| Custom Blow MoldsCustom blow molds made to your idea in wood, graphite, aluminum, steel or other materials. | Protostamps | Molds & Stamps | 1 | |
| Custom MoldA wooden mold made to your design; Leviathan quotes it by email. | Leviathan GlassWorks | Molds & Stamps | 1 | |
| Custom Stamps, 12–25 mmA small custom brass or graphite stamp made from your logo or design, for punty marks, pendants and signatures. | Protostamps | Molds & Stamps | 1 | |
| Custom Wooden MoldA wooden mold made from your sketch, drawing, 3D file, or a blown sample, milled on CNC from a CAD/CAM model. | Fantlab | Molds & Stamps | 1 | |
| Custom Wooden MoldSolid-wood blow molds CNC-machined to your drawing, with no horizontal joints and stainless hardware. Large ones get handles or can run i... | Jakobsson Sweden | Molds & Stamps | 1 | |
| Cylinder MoldAn Archetype wood cylinder mold in three diameters. | Blockhead Tools | Molds & Stamps | 3 | |
| Double Martini Glass MoldAn Archetype wood mold for a double martini glass. | Blockhead Tools | Molds & Stamps | 1 | |
| English Pub Glass MoldAn Archetype wood mold for a 20 oz English pub glass. | Blockhead Tools | Molds & Stamps | 1 | |
| Face Stamp, LargeA brass stamp mold ("fracchi") that presses a face motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Face Stamp, SmallA brass stamp mold ("fracchi") that presses a face motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Fin Mold, BowlA stainless fin mold for faceted bowls. | Jim Moore Glass Tools | Molds & Stamps | 2 | |
| Fin Mold, Extra SmallA raggilume fin mold for lampworking with 8 blades. | Carlo Donà | Molds & Stamps | 2 | |
| Fin Mold, LargeA raggilume fin mold for lampworking with 12 blades. | Carlo Donà | Molds & Stamps | 2 | |
| Fin Mold, MediumA raggilume fin mold for lampworking with 8 blades. | Carlo Donà | Molds & Stamps | 2 | |
| Fin Mold, PilsnerA stainless fin mold for faceted pilsner glasses. | Jim Moore Glass Tools | Molds & Stamps | 2 | |
| Fin Mold, SherryA stainless fin mold for faceted sherry glasses. | Jim Moore Glass Tools | Molds & Stamps | 3 | |
| Fin Mold, SmallA raggilume fin mold for lampworking with 8 blades. | Carlo Donà | Molds & Stamps | 2 | |
| Fin Mold, Small Tumbler/SchoonerA stainless fin mold for faceted small tumblers and schooners. | Jim Moore Glass Tools | Molds & Stamps | 3 | |
| Fin Mold, TumblerA stainless fin mold for faceted tumblers. | Jim Moore Glass Tools | Molds & Stamps | 2 | |
| Fin Mold, WineA stainless fin mold for faceted wine glasses. | Jim Moore Glass Tools | Molds & Stamps | 3 | |
| Flat-Based Amphora MoldAn Archetype wood mold for a flat-based amphora, 6" tall. | Blockhead Tools | Molds & Stamps | 1 | |
| Flower of Life StampA brass stamp that presses a flower of life pattern into hot glass. | Protostamps | Molds & Stamps | 2 | |
| Heart Graphite MoldGraphite punty molds, top and bottom, for a heart. | Blockhead Tools | Molds & Stamps | 2 | |
| Highball Glass MoldAn Archetype wood mold for a 5.5" highball glass. | Blockhead Tools | Molds & Stamps | 1 | |
| Honeycomb StampA brass stamp that presses a honeycomb pattern into hot glass. | Protostamps | Molds & Stamps | 1 | |
| IPA Glass MoldAn Archetype wood mold for a hot-pop IPA glass. | Blockhead Tools | Molds & Stamps | 1 | |
| Imperial (Nonik) Pint Glass MoldAn Archetype wood mold for an imperial nonik pint glass. | Blockhead Tools | Molds & Stamps | 1 | |
| Impression Plate #1A one-sided aluminum impression plate for rolling a pattern into hot glass. A second side can be added when ordering. | Steinert Industries | Molds & Stamps | 1 | |
| Impression Plate #2A one-sided aluminum impression plate for rolling a pattern into hot glass. A second side can be added when ordering. | Steinert Industries | Molds & Stamps | 1 | |
| Impression Plate #3A one-sided aluminum impression plate for rolling a pattern into hot glass. A second side can be added when ordering. | Steinert Industries | Molds & Stamps | 1 | |
| Impression Plate #4A one-sided aluminum impression plate for rolling a pattern into hot glass. A second side can be added when ordering. | Steinert Industries | Molds & Stamps | 1 | |
| Impression Plate #5A one-sided aluminum impression plate for rolling a pattern into hot glass. A second side can be added when ordering. | Steinert Industries | Molds & Stamps | 1 | |
| Impression Plate #6A one-sided aluminum impression plate for rolling a pattern into hot glass. A second side can be added when ordering. | Steinert Industries | Molds & Stamps | 1 | |
| Impression Plate #7A one-sided aluminum impression plate for rolling a pattern into hot glass. A second side can be added when ordering. | Steinert Industries | Molds & Stamps | 1 | |
| Impression Plate #8A one-sided aluminum impression plate for rolling a pattern into hot glass. A second side can be added when ordering. | Steinert Industries | Molds & Stamps | 1 | |
| Impression Plate #9A one-sided aluminum impression plate for rolling a pattern into hot glass. A second side can be added when ordering. | Steinert Industries | Molds & Stamps | 1 | |
| Irish Stout MoldAn Archetype mold for an Irish stout glass, in wood or graphite. | Blockhead Tools | Molds & Stamps | 2 | |
| Large Detachable Fin MoldThe large version of Jim Moore's detachable fin mold, with removable ribs held by a top ring and hose clamp. | Jim Moore Glass Tools | Molds & Stamps | 1 | |
| Lightbulb Ornament MoldAn Archetype wood mold for a lightbulb-shaped ornament. | Blockhead Tools | Molds & Stamps | 1 | |
| Medium Detachable Fin MoldThe medium version of Jim Moore's detachable fin mold, with removable ribs held by a top ring and hose clamp. | Jim Moore Glass Tools | Molds & Stamps | 1 | |
| Metal StampsMetal stamps for hot glass, made in-house at Novotný Glass in Nový Bor. | Novotný Glass Tools | Molds & Stamps | 1 | |
| Mighty Mold, LargeA madrona wood mold, made as either a slammer or a rotational mold. | Leviathan GlassWorks | Molds & Stamps | 1 | |
| Mighty Mold, MediumA madrona wood mold, made as either a slammer or a rotational mold. | Leviathan GlassWorks | Molds & Stamps | 1 | |
| Mighty Mold, Medium+A madrona wood mold, made as either a slammer or a rotational mold. | Leviathan GlassWorks | Molds & Stamps | 1 | |
| Mighty Mold, SmallA madrona wood mold, made as either a slammer or a rotational mold. | Leviathan GlassWorks | Molds & Stamps | 1 | |
| Mighty Mold, Small+A madrona wood mold, made as either a slammer or a rotational mold. | Leviathan GlassWorks | Molds & Stamps | 1 | |
| Mighty Mold, X-LargeA madrona wood mold, made as either a slammer or a rotational mold. | Leviathan GlassWorks | Molds & Stamps | 1 | |
| Mold CorkA cork for Blockhead's Archetype molds, sold singly or as a kit. | Blockhead Tools | Molds & Stamps | 2 | |
| Mushroom MoldAn Archetype wood mold for a mushroom. | Blockhead Tools | Molds & Stamps | 1 | |
| Nautilus StampA brass stamp that presses a nautilus pattern into hot glass. | Protostamps | Molds & Stamps | 2 | |
| Onion Ornament MoldAn Archetype wood mold for an onion-dome ornament. | Blockhead Tools | Molds & Stamps | 1 | |
| Optic Mold - 20 Point 45 x 90mmA 20-point optic mold for ribbing a gather, 45 mm across. | Carlo Donà | Molds & Stamps | 2 | |
| Optic Mold 12-1-8BA 12" cast aluminum optic mold with 8 semi-circular scallops, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 12-2-12AA 12" cast aluminum optic mold with 12 indentations, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 12-3-16AA 12" cast aluminum optic mold with 16 pointed ribs, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 12-4-24BA 12" cast aluminum optic mold with 24 indentations, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 12-5-8BA 12" cast aluminum optic mold with 8 pointed ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 12.5-1-28BA 12.5" cast aluminum optic mold with 28 pointed ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 18-16AA 18" cast aluminum optic mold with 16 pointed ribs, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 18-8AA 18" cast aluminum optic mold with 8 pointed ribs, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 4-1-20AA 4" cast aluminum optic mold with 20 ribs, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 4-10-5AA 4" cast aluminum optic mold with a 5-pointed star opening, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 4-11AA 4" cast aluminum optic mold with a heart-shaped opening, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 4-12-12BA 4" cast aluminum optic mold with 12 semi-circular indentations, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 4-13-8AA 4" cast aluminum optic mold with 8 scalloped ribs, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 4-14-16AA 4" cast aluminum optic mold with 16 pointed ribs, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 4-15-5AA 4" cast aluminum optic mold with a 5 sided design, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 4-16-12AA 4" cast aluminum optic mold with 12 pointed veins, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 4-17-16AA 4" cast aluminum optic mold with 16 scalloped ribs, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 4-2-12BA 4" cast aluminum optic mold with 12 ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 4-3-14BA 4" cast aluminum optic mold with 14 ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 4-4-10AA 4" cast aluminum optic mold with 10 semi-circular indentations, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 4-5-6BA 4" cast aluminum optic mold with a 6-pointed star opening, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 4-6-20AA 4" cast aluminum optic mold with 20 ribs, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 4-6-20BA 4" cast aluminum optic mold with 20 ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 4-7-12AA 4" cast aluminum optic mold with 12 ribs, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 4-8-18BA 4" cast aluminum optic mold with 18 scalloped ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 4-9-10BA 4" cast aluminum optic mold with 10 scalloped ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 6-1-8BA 6" cast aluminum optic mold with 8 pointed ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 6-2-12BA 6" cast aluminum optic mold with 12 pointed ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 6-3-24BA 6" cast aluminum optic mold with 24 pointed ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 6-4-8BA 6" cast aluminum optic mold with 8 rounded ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 6-5-32BA 6" cast aluminum optic mold with 32 pointed ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 6-8-40AA 6" cast aluminum optic mold with 40 pointed ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 6-9-20AA 6" cast aluminum optic mold with 20 pointed ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 7-14AA 7" cast aluminum optic mold with 14 indentations, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 7-15AA 7" cast aluminum optic mold with 15 indentations, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 9-1-8BA 9" cast aluminum optic mold with 8 semi-circular indentations, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 9-10-12BA 9" cast aluminum optic mold with 12 pointed ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 9-2-12AA 9" cast aluminum optic mold with 12 pointed ribs, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 9-2-12BA 9" cast aluminum optic mold with 12 pointed ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 9-3-18AA 9" cast aluminum optic mold with 18 pointed ribs, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 9-3-18BA 9" cast aluminum optic mold with 18 pointed ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 9-4-24AA 9" cast aluminum optic mold with 24 pointed ribs, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 9-4-24BA 9" cast aluminum optic mold with 24 pointed ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 9-5-32AA 9" cast aluminum optic mold with 32 pointed ribs, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 9-6-8BA 9" cast aluminum optic mold with 8 scalloped ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 9-7AA 9" cast aluminum optic mold with a heart shaped opening, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 9-8-5AA 9" cast aluminum optic mold with a 5-pointed star opening, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold 9-9-6BA 9" cast aluminum optic mold with 6 scalloped ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold N3-12BA 3" cast aluminum optic mold with 12 pointed ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold N3-D-12BA 3" cast aluminum optic mold with 12 pointed ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold N3.5-20BA 3.5" cast aluminum optic mold with 20 pointed ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold N3.5-32BA 3.5" cast aluminum optic mold with 32 pointed ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold N4.5-12BA 4.5" cast aluminum optic mold with 12 pointed ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold N4.5-R-10BA 4.5" cast aluminum optic mold with 10 scalloped ribs, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold N4.5-R-12BA 4.5" cast aluminum optic mold with 12 scalloped indentations, closed at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold S1-12AA 2-5/8" cast aluminum optic mold with 12 scalloped ribs, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold S2-16AA 2-5/8" cast aluminum optic mold with 16 pointed ribs, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold S3-24AA 2-5/8" cast aluminum optic mold with 24 pointed ribs, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold S4-32AA 2-5/8" cast aluminum optic mold with 32 pointed ribs, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold S5-3AA 2-5/8" cast aluminum optic mold with a triangular opening, open at the bottom. | Steinert Industries | Molds & Stamps | 1 | |
| Optic Mold Split 4AA 4" cast aluminum split optic mold with 8 ribs with semi-circular indentations running vertically, open at the bottom. It puts rounded r... | Steinert Industries | Molds & Stamps | 0 | |
| Optic Mold, 12 Point, 57mm x 100mmA 12-point optic mold for ribbing a gather, 57 mm across. | Carlo Donà | Molds & Stamps | 2 | |
| Optic Mold, 16 Point, 45mm x 90mmA 16-point optic mold for ribbing a gather, 45 mm across. | Carlo Donà | Molds & Stamps | 2 | |
| Optic Mold, 16 Point, 55mm x 100mmA 16-point optic mold for ribbing a gather, 55 mm across. | Carlo Donà | Molds & Stamps | 2 | |
| Optic Mold, 18 Point, 45mm x 90mmAn 18-point optic mold for ribbing a gather, 45 mm across. | Carlo Donà | Molds & Stamps | 2 | |
| Optic Mold, 20 Point - 45 x 95mmA 20-point optic mold for ribbing a gather, 45 mm across. | Carlo Donà | Molds & Stamps | 2 | |
| Optic Mold, 24 Point, 50mm x 90mmA 24-point optic mold for ribbing a gather, 50 mm across. | Carlo Donà | Molds & Stamps | 2 | |
| Optic MoldsOptic molds made in-house at Novotný Glass in Nový Bor. | Novotný Glass Tools | Molds & Stamps | 1 | |
| Pilsner Glass MoldAn Archetype wood mold for a pilsner glass. | Blockhead Tools | Molds & Stamps | 1 | |
| Pineapple Mold, 100mm x 185mm -, LargeA pineapple-pattern mold, 100 mm across and 185 mm tall. | Carlo Donà | Molds & Stamps | 2 | |
| Pineapple Mold, 130mm x 220mm - Extra, LargeA pineapple-pattern mold, 130 mm across and 220 mm tall. | Carlo Donà | Molds & Stamps | 2 | |
| Pineapple Mold, 37mm x 55mm -, Extra SmallA pineapple-pattern mold, 37 mm across and 55 mm tall. | Carlo Donà | Molds & Stamps | 2 | |
| Pineapple Mold, 45 × 105 mmA pineapple-pattern blow mold, 45 mm by 105 mm. | Jordan Kube | Molds & Stamps | 1 | |
| Pineapple Mold, 52mm x 90mm -, SmallA pineapple-pattern mold, 52 mm across and 90 mm tall. | Carlo Donà | Molds & Stamps | 2 | |
| Pineapple Mold, 60mm x 100mm -, MediumA pineapple-pattern mold, 60 mm across and 100 mm tall. | Carlo Donà | Molds & Stamps | 2 | |
| Pineapple Mold, 70mm x 130mm - Medium/LargeA pineapple-pattern mold, 70 mm across and 130 mm tall. | Carlo Donà | Molds & Stamps | 2 | |
| Pint Glass Hinge MoldA hinged mold for blowing pint glasses. | Block Party Blocks and Molds | Molds & Stamps | 1 | |
| Red Wine Glass MoldAn Archetype wood mold for a punty-style red wine glass. | Blockhead Tools | Molds & Stamps | 1 | |
| Reticello StampA brass stamp that presses a reticello pattern into hot glass. | Protostamps | Molds & Stamps | 3 | |
| Rocks Glass MoldAn Archetype wood mold for a 3.5" rocks glass. | Blockhead Tools | Molds & Stamps | 1 | |
| Small Detachable Fin MoldA fin mold with 18 removable ribs you can arrange as needed. Small, medium, and large rib profiles fit the same base. | Jim Moore Glass Tools | Molds & Stamps | 2 | |
| Snowman Ornament MoldA pair of Archetype wood molds, top and bottom, for a snowman ornament. | Blockhead Tools | Molds & Stamps | 2 | |
| Spindle Ornament MoldAn Archetype wood mold for a spindle ornament. | Blockhead Tools | Molds & Stamps | 1 | |
| Stamp Mold - BearA brass stamp mold ("fracchi") that presses a bear motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Cherub, LargeA brass stamp mold ("fracchi") that presses a cherub motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Cherub, MediumA brass stamp mold ("fracchi") that presses a cherub motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Face 2, Extra Extra SmallA brass stamp mold ("fracchi") that presses a face (second design) motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Face, Extra Extra SmallA brass stamp mold ("fracchi") that presses a face motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Face, Extra SmallA brass stamp mold ("fracchi") that presses a face motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Face, MediumA brass stamp mold ("fracchi") that presses a face motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Lion (Style 1), Extra SmallA brass stamp mold ("fracchi") that presses a lion (style 1) motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Lion (Style 1), LargeA brass stamp mold ("fracchi") that presses a lion (style 1) motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Lion (Style 1), MediumA brass stamp mold ("fracchi") that presses a lion (style 1) motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Lion (Style 1), SmallA brass stamp mold ("fracchi") that presses a lion (style 1) motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Lion (Style 2), LargeA brass stamp mold ("fracchi") that presses a lion (style 2) motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Moon, LargeA brass stamp mold ("fracchi") that presses a moon motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Moon, MediumA brass stamp mold ("fracchi") that presses a moon motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Moon, SmallA brass stamp mold ("fracchi") that presses a moon motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Shell, LargeA brass stamp mold ("fracchi") that presses a shell motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Shell, MediumA brass stamp mold ("fracchi") that presses a shell motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Shell, SmallA brass stamp mold ("fracchi") that presses a shell motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Skull, LargeA brass stamp mold ("fracchi") that presses a skull motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Skull, MediumA brass stamp mold ("fracchi") that presses a skull motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Skull, SmallA brass stamp mold ("fracchi") that presses a skull motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Strawberry, Extra SmallA brass stamp mold ("fracchi") that presses a strawberry motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Strawberry, Extra, LargeA brass stamp mold ("fracchi") that presses a strawberry motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Strawberry, LargeA brass stamp mold ("fracchi") that presses a strawberry motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Strawberry, MediumA brass stamp mold ("fracchi") that presses a strawberry motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Strawberry, SmallA brass stamp mold ("fracchi") that presses a strawberry motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Tiger, LargeA brass stamp mold ("fracchi") that presses a tiger motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stamp Mold - Tiger, MediumA brass stamp mold ("fracchi") that presses a tiger motif into a hot bit. | Carlo Donà | Molds & Stamps | 2 | |
| Stemless Wine Glass MoldAn Archetype mold for a stemless wine glass, in wood or graphite. | Blockhead Tools | Molds & Stamps | 2 | |
| Superior Stamp or Brand, 3/8" to 2.5"A custom 3D brass stamp or brand for marking hot glass, made from your design. | Leviathan GlassWorks | Molds & Stamps | 1 | |
| Superior Stamp or Brand, up to 3"A custom 3D brass stamp or brand for marking hot glass, made from your design. | Leviathan GlassWorks | Molds & Stamps | 1 | |
| Superior Stamp or Brand, up to 4"A custom 3D brass stamp or brand for marking hot glass, made from your design. | Leviathan GlassWorks | Molds & Stamps | 1 | |
| Textured Hand StampsHand stamps with a 1" textured pad on a wood handle, in the same 21 patterns as the small crimps. | Jim Moore Glass Tools | Molds & Stamps | 22 | |
| Tree Ornament MoldAn Archetype wood mold for a tree ornament, made for top or bottom punty. | Blockhead Tools | Molds & Stamps | 1 | |
| Tumbler MoldAn Archetype wood tumbler mold in four heights. | Blockhead Tools | Molds & Stamps | 4 | |
| White Wine Glass MoldAn Archetype wood mold for a white wine glass. | Blockhead Tools | Molds & Stamps | 1 | |
| 4" Casting LadleA 4" ladle for hot casting or scooping out the furnace. | R.R.R. Equipment | Other Hand Tools | 1 | |
| 6" Casting LadleA 6" ladle for hot casting or scooping out the furnace. | R.R.R. Equipment | Other Hand Tools | 1 | |
| 8" Casting LadleA 8" ladle for hot casting or scooping out the furnace. | R.R.R. Equipment | Other Hand Tools | 1 | |
| Aluminum Cane MarverAn aluminum cane marver with 6.5 grooves per inch on one side and 5 on the other, for use below 900°F. | Steinert Industries | Other Hand Tools | 1 | |
| Aluminum Puffer, 2"A two-part aluminum puffer, handy when working alone. The head also detaches to use on an air hose or a straight shaft. | Steinert Industries | Other Hand Tools | 1 | |
| Aluminum Puffer, 3"A two-part aluminum puffer, handy when working alone. The head also detaches to use on an air hose or a straight shaft. | Steinert Industries | Other Hand Tools | 1 | |
| Avolio Garage ForkA avolio fork for handling pieces in the garage. | Correll Glass Studio | Other Hand Tools | 1 | |
| Bar Loading ToolA tool for loading color bar. | Carlo Donà | Other Hand Tools | 1 | |
| Bent CaliperHand-forged bent calipers for measuring work, in three sizes. | Carlo Donà | Other Hand Tools | 2 | |
| Bent Cup Soffietta, 80mmx90mmA bent cup soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | Other Hand Tools | 3 | |
| Bent PufferA bent puffer that lets you blow into your own piece while working at the bench, with no assistant needed. | Jim Moore Glass Tools | Other Hand Tools | 5 | |
| Bent Soffietta, 100mmx85mmA bent soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | Other Hand Tools | 2 | |
| Bent Soffietta, 135mmx100mmA bent soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | Other Hand Tools | 2 | |
| Casting LadleA T-handled ladle for casting into sand molds, emptying a furnace, or glazing a new crucible. | Spiral Arts | Other Hand Tools | 1 | |
| Charging ShovelA shovel for charging cullet into the furnace. It holds about 25 lb, in stainless (16 lb) or a lighter aluminum version (8 lb). | Spiral Arts | Other Hand Tools | 1 | |
| Coppo, MediumA hand-forged coppo (coppa), medium size. | Carlo Donà | Other Hand Tools | 2 | |
| Curved Garage ForkA curved fork for handling pieces in the garage. | Correll Glass Studio | Other Hand Tools | 1 | |
| Diamond & Straight Shear SheathA sheath to protect and carry diamond or straight shears. | NobleGlassware | Other Hand Tools | 1 | |
| Diamond MarverA cast aluminum marver with a diamond pattern on one side. | Steinert Industries | Other Hand Tools | 1 | |
| Ferriti (Set of Four)A set of four ferriti. | Correll Glass Studio | Other Hand Tools | 1 | |
| FerroFerro plates in two sizes. | Correll Glass Studio | Other Hand Tools | 1 | |
| Flare ToolA brass flaring tool with four ribs on a wood handle. | Jim Moore Glass Tools | Other Hand Tools | 2 | |
| Flat Fibre BrushA copper-bound fibre brush on a sealed hemp handle for dusting color bar, garage parts and cane pickups; it burns down slowly. | Crow Print Tools | Other Hand Tools | 1 | |
| Foot Tools (FS Series)Essemce footing tools in three sizes, fitted with replaceable graphite plates. | Essemce | Other Hand Tools | 1 | |
| Garage PaddleA paddle for handling pieces in the garage, in two sizes. | Correll Glass Studio | Other Hand Tools | 1 | |
| Glass Casting LadlesLadles for casting glass, in three bowl sizes. | Correll Glass Studio | Other Hand Tools | 1 | |
| Glassblowing Jack SheathA sheath to protect and carry a pair of glassblowing jacks. | NobleGlassware | Other Hand Tools | 1 | |
| Iron Cane MarverA ductile iron cane marver with 5 grooves per inch on one side and 6.5 on the other. It can go in an enclosed oven. | Steinert Industries | Other Hand Tools | 1 | |
| Knocking-Off BarA bar (putsjärn) for tapping pieces off the punty. | Essemce | Other Hand Tools | 1 | |
| LadleA ladle bowl for moving molten glass, made to order. You weld or fix your own handle. | Masters of Glass | Other Hand Tools | 1 | |
| LadleA 6" ladle on a 50" T-handle for emptying a small furnace at the end of a session. | Mobile Glassblowing Studios | Other Hand Tools | 1 | |
| Lino's Bent Soffietta 45mmx52mmLino's bent soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | Other Hand Tools | 2 | |
| Lino's Straight Soffietta 45mmx52mmLino's straight soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | Other Hand Tools | 2 | |
| PastoraleA 6' pastorale with a 5" × 10" fork, for carrying a plate of cane into the glory hole. | Correll Glass Studio | Other Hand Tools | 1 | |
| Pastorale ForkA stainless steel pastorale fork, with other sizes available on request. | Masters of Glass | Other Hand Tools | 1 | |
| Pastorale ForkA T-handled fork that carries a plate up to 16" long (6" or wider) and sets it down on a standard fire brick. | Spiral Arts | Other Hand Tools | 1 | |
| Pocket InflatorLets an assistant blow into the pipe for bench blowing without touching the mouthpiece. It fits most pipes, with a rubber cap for cup pip... | Spiral Arts | Other Hand Tools | 1 | |
| Ring ToolsRing tools for rolling bits into perfect marbles and spheres on the bench. | Jim Moore Glass Tools | Other Hand Tools | 2 | |
| Round Fibre BrushA copper-bound fibre brush on a sealed hemp handle for dusting color bar, garage parts and cane pickups; it burns down slowly. | Crow Print Tools | Other Hand Tools | 1 | |
| Skippy's Chain ToolTools for making glass chain: a chain tool, and a link joiner for closing a chain into a loop. | Jim Moore Glass Tools | Other Hand Tools | 2 | |
| Steel Furnace RakeA steel rake for the furnace, made to order. | Hot Glass Color & Supply (house brand) | Other Hand Tools | 1 | |
| Straight CaliperHand-forged straight calipers for measuring work, in three sizes. | Carlo Donà | Other Hand Tools | 2 | |
| Straight Cup Soffietta, 70mmx85mmA straight cup soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | Other Hand Tools | 2 | |
| Straight Cup Soffietta, 80mmx90mmA straight cup soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | Other Hand Tools | 2 | |
| Straight Garage ForkA straight fork for handling pieces in the garage. | Correll Glass Studio | Other Hand Tools | 1 | |
| Straight PufferA puffer for blowing into a piece on the punty, to thin out bulging walls and shoulders. | Jim Moore Glass Tools | Other Hand Tools | 5 | |
| Straight Soffietta, 100mmx85mmA straight soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | Other Hand Tools | 2 | |
| Straight Soffietta, 135mmx100mmA straight soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | Other Hand Tools | 2 | |
| Straight Soffietta, 85mmx70mmA straight soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | Other Hand Tools | 2 | |
| Titanium No Scratch Glass PenA titanium pen for marking glass. | Mountain Glass Art | Other Hand Tools | 1 | |
| Traditional CopaA copa that turns an applied wrap into a clean half-round. | Jim Moore Glass Tools | Other Hand Tools | 2 | |
| Triangular CopaA copa that forms crisp triangular (prism) wraps. | Jim Moore Glass Tools | Other Hand Tools | 2 | |
| Custom Graphite Pour MoldCustom-milled graphite: pocketed pour molds, specialty shapes, or small blow molds, quoted by email. | Protostamps | Graphite Tools | 1 | |
| Custom Graphite StampsCustom graphite stamps for hot glass, made to your design; scope it with Protostamps by email first. | Protostamps | Graphite Tools | 1 | |
| Graphite Marver BlockA fine-grain graphite block in Blockhead's basic shape, set on a birch-ply base with rubber feet so it sits or clamps on the marver for h... | Blockhead Tools | Graphite Tools | 6 | |
| Graphite PaddleA graphite paddle with a replaceable blade and an insulating rubber grip. | Jim Moore Glass Tools | Graphite Tools | 2 | |
| Graphite Rod, 12 × 300 mmA 12 mm × 300 mm graphite rod. | Essemce | Graphite Tools | 1 | |
| Bench and Side TableA glassblowing bench with a separate side tool table, in powder-coated steel tube with maple seat and table. | Spiral Arts | Bench Equipment | 1 | |
| Gnarly Knockoff Pad, 10" × 12"A vermiculite-impregnated pad to knock finished pieces off onto, rated to 2000°F. | Leviathan GlassWorks | Bench Equipment | 2 | |
| Gnarly Knockoff Pad, 16" × 24"A large vermiculite-impregnated pad to knock finished pieces off onto, rated to 2000°F. | Leviathan GlassWorks | Bench Equipment | 2 | |
| Heat ShieldA rolling insulated heat shield with a reflective back and a sight-line window cut-out. | Spiral Arts | Bench Equipment | 1 | |
| MoldboyA compact single-arm pneumatic mold boy for small two-part molds, worked with a foot switch. It's small enough to carry to rental studios. | Jordan Kube | Bench Equipment | 1 | |
| Pipe CoolerA traditional wooden pipe cooler for the bench. | Fantlab | Bench Equipment | 1 | |
| Rolling YokeA sturdy rolling yoke with adjustable height, V-groove casters, and a post for adding weight on big pieces. | Spiral Arts | Bench Equipment | 1 | |
| Tripod Yoke StandA metal tripod stand for the R.R.R. yoke roller head, or for any fitting that goes into a standard 1/2" pipe. | R.R.R. Equipment | Bench Equipment | 1 | |
| Vacuum Plate for PaperweightsA vacuum plate that helps draw glass over paperweight figures and pulls out bubbles. Made to order to your size. | Steinert Industries | Bench Equipment | 1 | |
| YokeA yoke with 1" stainless steel bearings on a painted steel base, sized to drop into square tubing. | Mobile Glassblowing Studios | Bench Equipment | 1 | |
| YokeA ball-bearing yoke head that rolls smoothly on a contoured seat, made to weld onto your own floor stand. | Steinert Industries | Bench Equipment | 1 | |
| Yoke Stand Roller HeadsRoller heads that fit the R.R.R. tripod yoke stand. | R.R.R. Equipment | Bench Equipment | 1 | |
| Aluminized HoodAn aluminized hood for head and shoulder coverage when loading or working close to the furnace. | Chicago Protective Apparel | Protective Gear | 2 | |
| Aluminized Jacket, 30"A 30" jacket of 19 oz aluminized para-aramid blend. | Chicago Protective Apparel | Protective Gear | 1 | |
| Carbon/Kevlar Felt GlovesWool-lined five-finger gloves of carbon fiber and Kevlar felt. | Chicago Protective Apparel | Protective Gear | 2 | |
| Carbon/Kevlar Felt Mitt CoversClosed-top carbon/Kevlar felt covers that go over gloves or mitts, sold in pairs. | Chicago Protective Apparel | Protective Gear | 1 | |
| Carbon/Kevlar Felt MittsWool-lined mitts of carbon fiber and Kevlar felt for handling hot work. | Chicago Protective Apparel | Protective Gear | 2 | |
| CarbonX SleeveAn 18" CarbonX arm sleeve with a thumbhole. | Chicago Protective Apparel | Protective Gear | 1 | |
| Gaffer SleeveA heat-protective sleeve made to order: you choose the size, colors, and pattern, including a silver Kevlar option. | Lancelot S. Fraser | Protective Gear | 1 | |
| Kevlar SleeveA woven Kevlar arm sleeve, with or without a thumbhole. | Chicago Protective Apparel | Protective Gear | 1 | |
| Light Green Furnace GlassesPolycarbonate light-green lenses for furnace work, blocking UV and IR while keeping colors readable, in a range of frames. | Phillips Safety Products | Protective Gear | 16 |
No tools match. Suggest one?













































































































































































































































































































































































































































































































































































































































































