Other Hand Tools 52
Soffiettas (puffers) for blowing into a piece on the punty, calipers for measuring, rod and wire holders, mandrels, and other bench tools.
Types: Soffietta (puffer) 14 · Calipers 2 · Garage forks and paddles 4 · Pastorale 3 · Ferro and ferretti 2 · Copas 2 · Ladles 7 · Charging shovels 1 · Fibre brushes 2
| Photo | Tool | Maker | Sellers |
|---|---|---|---|
| 4" Casting LadleA 4" ladle for hot casting or scooping out the furnace. | R.R.R. Equipment | 1 | |
| 6" Casting LadleA 6" ladle for hot casting or scooping out the furnace. | R.R.R. Equipment | 1 | |
| 8" Casting LadleA 8" ladle for hot casting or scooping out the furnace. | R.R.R. Equipment | 1 | |
| Aluminum Cane MarverAn aluminum cane marver with 6.5 grooves per inch on one side and 5 on the other, for use below 900°F. | Steinert Industries | 1 | |
| Aluminum Puffer, 2"A two-part aluminum puffer, handy when working alone. The head also detaches to use on an air hose or a straight shaft. | Steinert Industries | 1 | |
| Aluminum Puffer, 3"A two-part aluminum puffer, handy when working alone. The head also detaches to use on an air hose or a straight shaft. | Steinert Industries | 1 | |
| Avolio Garage ForkA avolio fork for handling pieces in the garage. | Correll Glass Studio | 1 | |
| Bar Loading ToolA tool for loading color bar. | Carlo Donà | 1 | |
| Bent CaliperHand-forged bent calipers for measuring work, in three sizes. | Carlo Donà | 2 | |
| Bent Cup Soffietta, 80mmx90mmA bent cup soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | 3 | |
| Bent PufferA bent puffer that lets you blow into your own piece while working at the bench, with no assistant needed. | Jim Moore Glass Tools | 5 | |
| Bent Soffietta, 100mmx85mmA bent soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | 2 | |
| Bent Soffietta, 135mmx100mmA bent soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | 2 | |
| Casting LadleA T-handled ladle for casting into sand molds, emptying a furnace, or glazing a new crucible. | Spiral Arts | 1 | |
| Charging ShovelA shovel for charging cullet into the furnace. It holds about 25 lb, in stainless (16 lb) or a lighter aluminum version (8 lb). | Spiral Arts | 1 | |
| Coppo, MediumA hand-forged coppo (coppa), medium size. | Carlo Donà | 2 | |
| Curved Garage ForkA curved fork for handling pieces in the garage. | Correll Glass Studio | 1 | |
| Diamond & Straight Shear SheathA sheath to protect and carry diamond or straight shears. | NobleGlassware | 1 | |
| Diamond MarverA cast aluminum marver with a diamond pattern on one side. | Steinert Industries | 1 | |
| Ferriti (Set of Four)A set of four ferriti. | Correll Glass Studio | 1 | |
| FerroFerro plates in two sizes. | Correll Glass Studio | 1 | |
| Flare ToolA brass flaring tool with four ribs on a wood handle. | Jim Moore Glass Tools | 2 | |
| Flat Fibre BrushA copper-bound fibre brush on a sealed hemp handle for dusting color bar, garage parts and cane pickups; it burns down slowly. | Crow Print Tools | 1 | |
| Foot Tools (FS Series)Essemce footing tools in three sizes, fitted with replaceable graphite plates. | Essemce | 1 | |
| Garage PaddleA paddle for handling pieces in the garage, in two sizes. | Correll Glass Studio | 1 | |
| Glass Casting LadlesLadles for casting glass, in three bowl sizes. | Correll Glass Studio | 1 | |
| Glassblowing Jack SheathA sheath to protect and carry a pair of glassblowing jacks. | NobleGlassware | 1 | |
| Iron Cane MarverA ductile iron cane marver with 5 grooves per inch on one side and 6.5 on the other. It can go in an enclosed oven. | Steinert Industries | 1 | |
| Knocking-Off BarA bar (putsjärn) for tapping pieces off the punty. | Essemce | 1 | |
| LadleA ladle bowl for moving molten glass, made to order. You weld or fix your own handle. | Masters of Glass | 1 | |
| LadleA 6" ladle on a 50" T-handle for emptying a small furnace at the end of a session. | Mobile Glassblowing Studios | 1 | |
| Lino's Bent Soffietta 45mmx52mmLino's bent soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | 2 | |
| Lino's Straight Soffietta 45mmx52mmLino's straight soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | 2 | |
| PastoraleA 6' pastorale with a 5" × 10" fork, for carrying a plate of cane into the glory hole. | Correll Glass Studio | 1 | |
| Pastorale ForkA stainless steel pastorale fork, with other sizes available on request. | Masters of Glass | 1 | |
| Pastorale ForkA T-handled fork that carries a plate up to 16" long (6" or wider) and sets it down on a standard fire brick. | Spiral Arts | 1 | |
| Pocket InflatorLets an assistant blow into the pipe for bench blowing without touching the mouthpiece. It fits most pipes, with a rubber cap for cup pip... | Spiral Arts | 1 | |
| Ring ToolsRing tools for rolling bits into perfect marbles and spheres on the bench. | Jim Moore Glass Tools | 2 | |
| Round Fibre BrushA copper-bound fibre brush on a sealed hemp handle for dusting color bar, garage parts and cane pickups; it burns down slowly. | Crow Print Tools | 1 | |
| Skippy's Chain ToolTools for making glass chain: a chain tool, and a link joiner for closing a chain into a loop. | Jim Moore Glass Tools | 2 | |
| Steel Furnace RakeA steel rake for the furnace, made to order. | Hot Glass Color & Supply (house brand) | 1 | |
| Straight CaliperHand-forged straight calipers for measuring work, in three sizes. | Carlo Donà | 2 | |
| Straight Cup Soffietta, 70mmx85mmA straight cup soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | 2 | |
| Straight Cup Soffietta, 80mmx90mmA straight cup soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | 2 | |
| Straight Garage ForkA straight fork for handling pieces in the garage. | Correll Glass Studio | 1 | |
| Straight PufferA puffer for blowing into a piece on the punty, to thin out bulging walls and shoulders. | Jim Moore Glass Tools | 5 | |
| Straight Soffietta, 100mmx85mmA straight soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | 2 | |
| Straight Soffietta, 135mmx100mmA straight soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | 2 | |
| Straight Soffietta, 85mmx70mmA straight soffietta (puffer) for blowing into a piece while it's on the punty. | Carlo Donà | 2 | |
| Titanium No Scratch Glass PenA titanium pen for marking glass. | Mountain Glass Art | 1 | |
| Traditional CopaA copa that turns an applied wrap into a clean half-round. | Jim Moore Glass Tools | 2 | |
| Triangular CopaA copa that forms crisp triangular (prism) wraps. | Jim Moore Glass Tools | 2 |
































